Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Ammo Direct Darkness


User Tag List

Results 1 to 15 of 19
Like Tree19Likes

Thread: Angle Compensation

Threaded View

  1. #11
    Member
    Join Date
    May 2012
    Location
    Taranaki
    Posts
    1,695
    Minor point but the method based on horizontal distance gets worse the further out you get. It works fine at "normal" hunting distances out to 400 or 500 or so but after that I would recommend you estimate the angle and put that into you ballistic data.

    I would have tried to explain angle shooting as gravity deflection is always the same regardless of angle but with angle some of that deflection is along the line of sight instead of perpendicular to it i.e. vertical. The portion of gravity deflection along the line of sight you don’t see so you are simply left with less vertical deflection. (i.e. what Gadgetman said!)

    Couple of other points though about hold over. As Dougie's data shows, a 300m shot with a 30 degree angle (quite steep) changes your point of impact about 3 inches. Typically this would not result in a clean miss on a good central shoulder shot. The other consideration is the angle you are looking at the animal at. If you are above an animal you want to hit it a little high to angle the projectile through the vitals. If you are below an animal you need to aim a little low on the shoulder for the same reason.

    Lastly @Dougie, I suggest you sight your 223 in at 200m and re-run those deflection numbers. You will see, with a 200m zero, it is quite easy to hold over on animals out to 300m or so at typical 223 velocities.
    veitnamcam and Grunta like this.

 

 

Similar Threads

  1. Angle Cosine Indicator
    By Dead is better in forum Firearms, Optics and Accessories
    Replies: 17
    Last Post: 24-12-2014, 08:45 AM
  2. leica geovid dioptre compensation dials jammed
    By PerazziSC3 in forum Firearms, Optics and Accessories
    Replies: 2
    Last Post: 27-02-2013, 03:03 PM
  3. Ballistic fte update now angle meter not working on HUD
    By Smiddy in forum Reloading and Ballistics
    Replies: 3
    Last Post: 26-01-2013, 11:56 PM
  4. GETTING THE ANGLE RIGHT
    By Scribe in forum Shooting
    Replies: 16
    Last Post: 17-07-2012, 12:04 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!