Thread: bolt failure P14

Originally Posted by zimmer

@mucko I know you have posted load info in your original post and then bits thru the thread but would you mind reposting for both your previous load and the nasty Barnes stuff.

Also what is your barrel length, each load's catridge's OAL. I'm assuming you have jump as well?

Just playing with QL.

i had used barnes before hand, then changed to nosler lr 129gr i had that load from 58.5-62.5gr in .2gr increments trim length 2.490 coal 3.184. i found nodes in the 59.5 and 61.5gr range. i then changed back to the barnes LRX
i (foolishly) did not check the barnes sight for new data. when i first built the rifle 6 years ago there from my recollection no load data (could be wrong) i have never successfully had the time to find a load to suit the rifle so it spend plenty of time hiding in the corner. if i did everything over and could advise anyone regardless of your powder recommendation check the requirement of the projectile maker.