Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Alpine ZeroPak


User Tag List

Results 31 to 45 of 83
Like Tree62Likes

Thread: Factory ammo fliers every 3 shots

Threaded View

dannyb Factory ammo fliers every 3... 08-01-2019, 07:37 PM
dannyb 102385 Typical group 2 shots... 08-01-2019, 07:39 PM
Mooseman Check everything is tight, as... 08-01-2019, 07:47 PM
dannyb Yup everything is nice and... 08-01-2019, 07:58 PM
2post Check the primers to make... 08-01-2019, 08:07 PM
gundoc It sounds like a bedding... 08-01-2019, 08:08 PM
Woody If its always the third shot... 08-01-2019, 08:08 PM
dannyb not a heat issue, my last 2... 08-01-2019, 09:26 PM
chainsaw When you pull the action out... 08-01-2019, 09:37 PM
R93 Bedding issue if always 3rd... 08-01-2019, 08:12 PM
Marty Henry Best guess bedding is shot as... 08-01-2019, 08:22 PM
Micky Duck run paper between barrel and... 08-01-2019, 08:53 PM
dannyb have checked the barrel and... 08-01-2019, 09:24 PM
longrange308 Too much recoil :D 08-01-2019, 10:02 PM
dannyb zero recoil :D 08-01-2019, 10:16 PM
Woody Some rifles are produced with... 09-01-2019, 10:23 AM
Gibo Bit of fingernail stuck... 09-01-2019, 11:06 AM
R93 Experienced that eh?... 09-01-2019, 11:14 AM
Guest Mine did that with heavy... 09-01-2019, 11:45 AM
Sideshow dannyb is it a wooden stock... 09-01-2019, 12:06 PM
dannyb Ok so I pulled the action and... 09-01-2019, 01:05 PM
Gibo If it was me, and I'm a rough... 09-01-2019, 01:08 PM
dannyb What about building up the... 09-01-2019, 01:18 PM
Gibo Hot glue is not a suitable... 09-01-2019, 01:23 PM
dannyb I thought that may be the... 09-01-2019, 01:27 PM
R93 I would be happy to bed it... 09-01-2019, 01:34 PM
dannyb I'm in Oxford North... 09-01-2019, 01:36 PM
dannyb Gibo 102420 102421 ... 09-01-2019, 01:39 PM
gonetropo dont use "araldite either" i... 09-01-2019, 01:38 PM
Gibo Mmm do you think that's... 09-01-2019, 01:47 PM
dannyb Yup definitely been rubbing,... 09-01-2019, 01:59 PM
R93 Can you post a pic of your... 09-01-2019, 02:05 PM
dannyb R93 102425 102426 ... 09-01-2019, 02:12 PM
R93 That's good. Plenty of room... 09-01-2019, 02:31 PM
Gibo Don't be a blouse, sand that... 09-01-2019, 02:25 PM
R93 That's actually not a bad... 09-01-2019, 02:29 PM
Bagheera My 2c Cent 1 : is this... 09-01-2019, 03:26 PM
dannyb Been bedded by someone who... 09-01-2019, 04:22 PM
Cordite Precision is hitting where... 09-01-2019, 05:27 PM
dannyb Agree I'm just looking for... 09-01-2019, 05:34 PM
Cordite Yes. Looking at groups... 09-01-2019, 06:12 PM
Cigar I have a Brno 243 that has a... 09-01-2019, 06:13 PM
Guest I made some pillars for my... 09-01-2019, 06:55 PM
Micky Duck ok looking at that it was... 09-01-2019, 06:55 PM
dannyb Yup R93 was gonna do it, then... 09-01-2019, 07:03 PM
Tankd If your barrel is a 1 in 10... 09-01-2019, 08:14 PM
jakewire Also Danny when you do sort a... 09-01-2019, 08:47 PM
dannyb I was looking at loading 90g... 09-01-2019, 09:25 PM
stug This will do it ... 09-01-2019, 09:28 PM
jakewire That looks the story. 09-01-2019, 09:30 PM
Cigar If they are the same Hornady... 09-01-2019, 09:53 PM
Guest Ive setteled on game kings in... 09-01-2019, 10:10 PM
Bagheera Micky Duck sorry about that... 09-01-2019, 10:29 PM
Cordite Agree. All I am saying is,... 09-01-2019, 11:36 PM
dannyb https://www.gunworks.co.nz/sho... 10-01-2019, 03:01 AM
Micky Duck use the same target over 3... 10-01-2019, 07:33 AM
Cordite He heh, yes, who would not... 10-01-2019, 08:01 AM
Flyblown Regarding bullets for hunting... 10-01-2019, 10:23 AM
gundoc The reason the .243 performs... 10-01-2019, 10:44 AM
R93 I used a 243 late 80s early... 10-01-2019, 11:11 AM
Flyblown Funny how the last three... 10-01-2019, 11:54 AM
Guest I think you will find thats... 10-01-2019, 12:00 PM
Gibo No, just 243 and 270 10-01-2019, 01:58 PM
Cigar For what it’s worth given... 10-01-2019, 12:42 PM
dannyb Pulled the action out after... 10-01-2019, 01:21 PM
R93 I would relieve that king... 10-01-2019, 01:32 PM
dannyb The tang is bedded as well... 10-01-2019, 01:41 PM
dannyb Finished off with some true... 10-01-2019, 02:50 PM
Micky Duck IF your bolt is now dificult... 10-01-2019, 07:18 PM
dannyb Only problem is now I want... 10-01-2019, 11:06 PM
tetawa You'll upset a few if you own... 11-01-2019, 09:00 AM
dannyb Yeah probably better off... 11-01-2019, 09:05 AM
dannyb Well success, put 4 rounds... 11-01-2019, 07:17 PM
stug Nice, I rode past as you were... 11-01-2019, 07:34 PM
dannyb Should've stopped and said... 11-01-2019, 09:19 PM
Micky Duck great result.enjoy it. 11-01-2019, 08:12 PM
Ryan_Songhurst This will also suffice: ... 11-01-2019, 08:39 PM
jakewire Excellent. 11-01-2019, 08:35 PM
Ryan_Songhurst Pre 64 m70 in 270win... now... 11-01-2019, 08:36 PM
Mooseman Sounds like a good result , I... 11-01-2019, 11:41 PM
dannyb I have ordered some from... 11-01-2019, 11:49 PM
Dama dama Good stuff dannyb glad that... 13-01-2019, 09:13 AM
Micky Duck when you buy it Ryan... 13-01-2019, 09:21 AM
  1. #1
    Unapologetic gun slut dannyb's Avatar
    Join Date
    May 2018
    Location
    Oxford, North Canterbury
    Posts
    9,520

    Factory ammo fliers every 3 shots

    Hey team.
    Took my new rifle out for a spin today.
    She's a winchester mod 70 243.
    I intend to reload for it and have ordered some eldx 90g which should be here mid February.
    I bought some hornandy whitetails 100g soft points just to run through it in the meantime as I can use the brass.
    I put 20 rounds through the rifle today getting a feel for it and sighting in.
    But I foubd that I could put 2 shots almost on top of each other and then the 3rd would always be a flier 3 or 4 inches higher.
    Any idea what would cause this ? Or is it just me getting used to the rifle ?
    Very happy with everything else it shoots nice trigger is good no creep and about 2.5lbs of pull. It feeds really well too.
    It's not an issue for hunting too much as I have never needed 2 shots to kill anything but just curious as to what might be causing the fliers.
    Took thd rifle home and gave it a really good clean just with patches and gun oil.
    If nothing here sheds light I'll take it round to a mate and get him to put a few down range to see if it's just me.
    Thanks

 

 

Similar Threads

  1. 6.5 284 factory ammo
    By Mick Hunter in forum Reloading and Ballistics
    Replies: 6
    Last Post: 25-10-2018, 08:32 PM
  2. factory ammo for 243
    By andyanimal31 in forum Reloading and Ballistics
    Replies: 8
    Last Post: 02-03-2017, 08:23 AM
  3. best factory ammo t3 308
    By buzzman in forum Reloading and Ballistics
    Replies: 48
    Last Post: 20-10-2016, 08:48 AM
  4. Re:Factory Ammo .308
    By Chris in forum Reloading and Ballistics
    Replies: 9
    Last Post: 30-07-2012, 07:02 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!