Thread: Fast twist 243

Originally Posted by Ground Control

That’s a nice setup
What Scope and Suppressor are you going to use ?

Not sure. Currently have my Minox ZP5 5-25x but too heavy. Also have a Kahles Helia 3-18x50 which is ok, but in use on another rifle. Have a fixed power Swarovski 7x50 but no; heavy and no benefits. New scopes are ridiculously priced now so looking at the secondhand market with half an eye; Schmidt & Bender with BDC turrets (a moust for me) tends to pop up regularly. Suppressor will be my Atec Optima

Originally Posted by Tahr

Barrel is interesting. Canadian. https://internationalbarrels.com

IBI has made quite a name for themselves here. With US export regulations, the Canadians took that market (non-chambered barrels require next to nil paperwork) and they've proven themselves with the PRS shooters especially. I asked my gunsmith to dip my stainless steel barrel in the bluing bath, normally this will give the lightest of grey colours. With the IBI, the bluing didn't take at all due steel quality.

Originally Posted by Ground Control

I have an IBI barrel on my Tikka 6x45 , it is the most accurate Rifle I own .
I’d recommend them if someone is in the market for a new barrel

IS that the 6mm-223 wildcat or something else? What do you shoot it in? Used to have a 6x45 in a Sako Vixen, lovely cartridge as long as I didn't shoot the deer in the lungs.

Originally Posted by Jaco Goosen

Attachment 272697
I've been shooting a 243W as well as the Ackley with either 1/7.5, 1/7.75 or 8t since forever.

Im currently using this tikka fitted with a Trueflite, 7.5t, pushing 109gr Bergers at 3050fps. Basically the same performance I got from my 6mm Creedmoor.

Nothing wrong with 243W mate, still hits way above its weight class.

That's my opinion too, with shot placement it just works.
What powders do you use? I was going to try Vit N560 (what I have), if not ok then try Vit N160/Norma MRP (what I can easily get)