Printable View
Hi guys, can anyone recommend a recipe that shoots well out of a husqvarna 1600?
Fairly accurate rifle with Hornady whitetail 180gr and Winchester ballistic tip 168gr.
I have a lot of brass at home and wondering what a good start point might be for making up some loads.
Thanks in advance
Mine likes 59gn's 2209, with either a 165SGK or SST, coal of 83.3mm. Wasnt very fussy on projectile, tried some flat base projectiles and some flat nose bush type projectiles and they all seemed to shoot 1moa or less for 5 shots.
Sako used to make a 155 grain factory load that grouped best in my Husky, below 1.5 moa consistently which is fine for hunting. My 3000 fps 150 grain handloads are about 1.75 moa, and the 2900 fps 168 grainers are clearly superior at below 1 moa. ADI 2209 for the 150's and 2213SC for the 168's.
2209 is the go for the 06.
Up to 58-60 with a 150
57-59 with a 165
55.5-57 with a 180.
Sent from my iPhone using Tapatalk
Awesome, thanks guys. Does the rifle get fussy about where the projectile is seated? Do you have it kissing the lands?
set up your die using the best factory load you have...its not perfect but will "rough enough" give you a similar jump to rifling (because the die will touch the olgive curey bit at same diameter in both projectiles) if feel the need tweak it from there...Ive done it this way for 30 years without issue...as long as it fits in magazine and chambers nicely I leave it alone and just keep it the same.Quote:
Originally Posted by goatcommander
I didnt even bother to find the lands, just seated the bullet what looked about right, coloured up the bullet with a marker pen and couldnt find any land marks so all good to go.
Alight thanks. So Husky- a good start point for me will be to go 165grSST, 59gn 2209 and seat the projectile to 83.3mm C.O.A.L . And we should be shooting 1moa at 100m?
All with in reason of course
Attachment 250227
Heres some pics of my Husqvarna in action for ya boys Attachment 250228
Probably pay to be a wee bit cautious........try 3 @ 57, 3 @ 58, and then 3 @ 59. Check them out, look for the usual pressure signs etc, and if the 59's do what you want, load up 5 rounds and try another group. If thats minute of goat, or minute of deer and your happy, then youre all sorted. Definitely not your standard start to load development, but it might just work.Quote:
Originally Posted by goatcommander
30-06s seem to shoot well.
Years ago I loaded for 3 or 4 of us using 30-06s.
Rational was to save money and all used the same load, so on a trip all carried the same load but not packets.
I used 52 grs WIN 760 and 168 Nosler Ballistic Tip.
A mate later had a Husqvarna possibly a 1640 and it shot fairly well with this load too.
Pretty much all bush hunting but the odd rabbit got whacked at 200m or so when practicing for real.
59 gns of 09 with a 165 is a hot load.
Start at 56/57 gns
Sent from my iPhone using Tapatalk
I have had three of them, and still have another one now. The following load they all shot very well:
180 Sierra SP or a Hornady 180 round nose bullet, with 57.5 grains of 2209, any brass any decent primer. Seated just off the lands. If there is nothing wrong with the rifle, it will shoot these bullets and load well or better I reckon.
It's a standard load I have used in several .30/06's and some of them have been Husqvarnas. I have done so much shooting with .30/06's I don't do load work ups any more
Depending on the rifle and how old your 2209 powder is, it will give you between 2650 and 2800 fps.
The 3006 is a pretty unfussy cartridge loaded short, long, fast or slow with heavy or light projectiles it seems quite happy.
Totally agree with the above. This load is for the older and slower version of AR2209. Current data from Nosler lists 57.5 grains of H4350 (AR2209) with the 165/168 grain projectile MAX. It pays to be suspicious of any loads for AR2209 with the pressure in CUP.Quote:
Originally Posted by Dicko
GPM.
Awesome thanks guys a lot of good information here.
I have another .30-06 which is quite a fussy rifle. The brand is called Stiga, it’s m96 action and I read somewhere they came factory with a Shultz and Larson barrel. It sprays every factory 150gr projectile but it would circumcise a bird at 200m with Hornady custom 180gr sst. 5 shots under an inch at 100m. It’s a shame hornady stopped manufacturing that ammo.
I read on another forum on here from 4 years ago that someone’s husqvarna 1600 .30-06 shot really well with winched super x 150gr.
Can anyone confirm this?
Your really going to have to try it abd see. What shoots good in my rifle might shoot like shit in yours
Yeah that’s a good point you’re not wrong 👍 I’ll get down to the range next month and will see how I get on. CheersQuote:
Originally Posted by blip
so you DUPLICATE as near as you can what ever that 180 was doing..only need one factory round to do it...it gives you the jump to lands etc and internet SHOULD give you approximate velocity it was supposed to be doing... set up another similar 180grn projectile at same length and velocity and chances are high you will see similar results.yes Grandpamac will be closerer using his chronicgraph...but book values wont be that far off...Quote:
Originally Posted by goatcommander
Me thinks it so bloody refreshing to see a bloke using an old Husky in an old, but oh so legendary calibre, with wooden stock of a shape I recognise as a stock, with a non dailing, no fiddley twiddly parallax knob scope. The only two accessories seen here are two bits of leci tape, one black, one yellow. Very practical, very refreshing. Just my 2 pence worth.
Cheers MG
Thanks for the nice compliment mate that warms my heartQuote:
Originally Posted by Muttonguts
Qn. What is your best/favourite load for xyz?Quote:
Originally Posted by Marty Henry
Answer. Don't ask for favourite loads on the internet or face ache.
Check with the powder manufacturer.
Thanks for that, very useful. Guess what you get when you check with the powder manufacturer. You're getting their favourite loads in an individual rifle. Off the internet.Quote:
Originally Posted by Oldbloke
