Thread: Let's see those 284s

Hi folks.

After getting my 300 win mag sorted I've decided I like the idea of having a lighter and compact rifle to shoot out to 800y max on a good day.

Hence going back to what I was going to do originally and build a 284win.

That being said with playing Mickey mouse with rifles and I'm currently speaking to Greg at Terminator products I'd like to see those 284s!

And go!

I have two

First a M595 in a McMillan Edgetech CF stock. 22" barrel. Really nice.

Then old stumpy the 17" T3 with DPT magnum on it. I shoot 162g Amax at a bit over 2700 from this one, which holds 1000 ft-lb to 800 yards and shoots like this at 400 yards.

Sent from my SM-G900I using Tapatalk

Originally Posted by GWH

I have two

First a M595 in a McMillan Edgetech CF stock. 22" barrel. Really nice.

Then old stumpy the 17" T3 with DPT magnum on it. I shoot 162g Amax at a bit over 2700 from this one, which holds 1000 ft-lb to 800 yards and shoots like this at 400 yards.

Sent from my SM-G900I using Tapatalk

Id say the majority will look very similar to the second one pictured here... lol mine is same spec but 19 inch and greystone. Nice accuracy there what load are you running?

Originally Posted by distant stalker

Id say the majority will look very similar to the second one pictured here... lol mine is same spec but 19 inch and greystone. Nice accuracy there what load are you running?

162g Amax seated out long in the neck only (long throated to suit) 52.5gr H414 with fed 215 mag primers in lapua 6.5x284 brass expanded and neck turned.

Sent from my SM-G900I using Tapatalk

Originally Posted by GWH

I have two

First a M595 in a McMillan Edgetech CF stock. 22" barrel. Really nice.

Then old stumpy the 17" T3 with DPT magnum on it. I shoot 162g Amax at a bit over 2700 from this one, which holds 1000 ft-lb to 800 yards and shoots like this at 400 yards.

Sent from my SM-G900I using Tapatalk

Thats some fine shooting, is that a Tikka barrel rechambered?

Originally Posted by Beetroot

Thats some fine shooting, is that a Tikka barrel rechambered?

Yep sure is, I brought it as a 7mm08, it was already cut to 17". I shot it before I had it rechambered and it put 3 in one hole at 100, I almost didn't want to mess with it incase it stuffed it up, but it panned out obviously.

Originally Posted by GWH

Yep sure is, I brought it as a 7mm08, it was already cut to 17". I shot it before I had it rechambered and it put 3 in one hole at 100, I almost didn't want to mess with it incase it stuffed it up, but it panned out obviously.

If you ever want to see im interested

Sent from my SM-G935F using Tapatalk

Currently doing one at present also with a bit of advice along the way from GWH. Wanted something nice to carry with my rem mag reserved for long range. Settled on this t3 (stug stock to come) with a vx3 and hardy can. Dies and brass enroute with load development to come

Originally Posted by cameronjackwhite

Currently doing one at present also with a bit of advice along the way from GWH. Wanted something nice to carry with my rem mag reserved for long range. Settled on this t3 (stug stock to come) with a vx3 and hardy can. Dies and brass enroute with load development to come Attachment 95027

Loose the Factory Tikka rings Cam - When i had them on mine the scope moved in them under recoil. Even with the stainless screws fitted to them they still bind up and dont tighten properly. I replaced with Talleys, all good now.

Originally Posted by GWH

Loose the Factory Tikka rings Cam - When i had them on mine the scope moved in them under recoil. Even with the stainless screws fitted to them they still bind up and dont tighten properly. I replaced with Talleys, all good now.

The talleys are coming with my next lot from gunworks, due in a week or so. I dont trust the tikka rings either

Originally Posted by GWH

Loose the Factory Tikka rings Cam - When i had them on mine the scope moved in them under recoil. Even with the stainless screws fitted to them they still bind up and dont tighten properly. I replaced with Talleys, all good now.

why do they not do up properly? Do the flats on the rings touch before they tighten up on the scope?

Originally Posted by cameronjackwhite

Currently doing one at present also with a bit of advice along the way from GWH. Wanted something nice to carry with my rem mag reserved for long range. Settled on this t3 (stug stock to come) with a vx3 and hardy can. Dies and brass enroute with load development to come Attachment 95027

Can I ask who is going to ream it for you.

Sent from my SM-G900I using Tapatalk

Originally Posted by 25/08IMP

Can I ask who is going to ream it for you.

Sent from my SM-G900I using Tapatalk

Cleland gunsmithing in Hamilton have reamed it for me. All ready for load development now.

Originally Posted by cameronjackwhite

Currently doing one at present also with a bit of advice along the way from GWH. Wanted something nice to carry with my rem mag reserved for long range. Settled on this t3 (stug stock to come) with a vx3 and hardy can. Dies and brass enroute with load development to come Attachment 95027

This one must be well good even comes with a fork

Originally Posted by Sideshow

This one must be well good even comes with a fork

Can negotiate a deal on said fork. Keeping the rifle though