Some reasons why it often goes bad.

As far as precision goes, it is how we measure how far you can shoot. If the rifle shoots three inches then someone will tell you to shoot no further than 200m with it.

Let's say the heart is 4" and my rifle makes a 10" wound channel.

I need to get inside 12" of the point of aim to take out he heart.

A 2" group gets me within 12" of the heart to how far away?

Do I really need bench rest precision or am I better off with a rifle set up to shoot off of rocks in boulder fields at messed up angles?




Sent from my CPH1701 using Tapatalk

if you waiting for Robbie to do job you will be waiting a while......R.I.P. Robbie.

Quote:

---

Originally Posted by Ryan_Songhurst

All the aforementioned variables pale in comparison to the nut behind the bolt. Some people can shoot better than others. You can give the most accurate rifle in the world to an average shooter and its gonna look like an average shooting rifle. I really dont read much into all the really nitty gritty fine points of trying to squeeze every drop of accuracy y out of a hunting rifle. 100% of the time an average load will shoot better by working on technique and consistent trigger pull. I guarantee 90% of people that get frustrated about their rifle that only shoots 1moa or even a bit more, instead of tiny little groups, are incapable of CONSISTENTLY shooting tiny little groups anyhow.

---

Absolutely Ryan. Trying to shoot small groups is a cool pastime but as u say ...
Litz has done some interesting study, using what he calls a WEZ analysis and to cut a long story short : a super precision rifle will actually put buggerall more meat in the freezer than a 'regular' one.
But having said that, lots of rifles will benefit from some work, even if it just puts your head in a good place.
The "gun handling" part is huge. Just a changed body position can have a big impact on group sizes. Too much body angle and the butt is out on the point of the shoulder. Being more straight behind the rifle can make a difference. A vertical pistol grip that puts the trigger hand and trigger finger in a nice relaxed position is Gold for good prone shooting. A nice light trigger ......

I have found thumb placement and pressure changes my shooting dramatically. Just another variable :D I may look at bedding it in the near future ;)

said it before and will say it again.....if you can CONSISTANTLY hit a 3ltr milk jug/bottle at a given range ,you can kill a deer at same range in same circumstances/contorted positions....all things being equal thats about same size n shape as a deers boiler room.... piece of cake to do it off a bench...off elbows after a run.....with a rifle thats scope is too high/low stock to short.long...trigger at 12lb...not so much.
hitting something that size from steady rest at 2-300 yards is pretty much a given for most folk...try it standing in a hurry and 50 yards is about limit...sitting using knees for rest Id back myself out to 150.
I guess thats my hunting standard of accuracy needed.

You don't want body position to have a big impact on your shooting.

Shoot five rounds each in a different body position. Each one should be realistic for field shooting.

This is how well you and your rifle group in the field.

Sent from my CPH1701 using Tapatalk

Quote:

---

Originally Posted by LRP

I shall PM ya later. I'm sitting in Starbucks, Saigon and don't know anyone here who can loan me a shooter. I aint never seen so many scooters !!!

---

You are really funny , that is if you are in District 1 so adventurous . And if you where " loaned a shooter " , you would have the dubious privilege of staying in Chi Hoa without the room service of course and it is only a short hop from starbucks to District 10 .

I’m enjoying this thread as there is so much to learn. I’m not so interested in an English lesson though.

I put the paper plate challenge up so I know who to listen to.

Now I think I’ll give it a go next time I’m at the range, it’ll be my Fowler (1st shot) at 200 and I’ll post it here, good or bad. My rifle will never be a bench rest rifle so I’m keen to know more about technique.

Quote:

---

Originally Posted by 2post

I’m enjoying this thread as there is so much to learn. I’m not so interested in an English lesson though.

I put the paper plate challenge up so I know who to listen to.

Now I think I’ll give it a go next time I’m at the range, it’ll be my Fowler (1st shot) at 200 and I’ll post it here, good or bad. My rifle will never be a bench rest rifle so I’m keen to know more about technique.

---

Don't listen to people who post groups on the internet. Don't believe anything. Go try understand it from first principles.

It's a teach a man to fish thing. You can learn what the "experts" say and copy them, but when you have a problem the experts will not be there. The experts likely don't do exactly what you do and recycled solutions suck.

I care about the shot I mentioned earlier. I made a similar shot recently, not perfectly but I was set up for 200m (new rifle, quick zero with a box of factory ammo and hunting). 330m which seemed straight up. I let the rifle smack me over to make the shot. 7mm rem mag, 175gr pill, rifle barely on my shoulder and no effort to contain recoil. Blood pouring from my forehead.
Stuck in creek bed on an off camber gravel bar shooting off a full heavy pack.

I did this because I knew if I let the rifle recoil in this way I could factor out my other problems and I did not have time to do things the way I would have liked.

This is not benchrest. This is ugly. Field shooting is ugly.

Sent from my CPH1701 using Tapatalk

That’s not for me, it’s got to be a clean kill, or my fingers not on the trigger. Side on, within range, good rest or the deer walks.

If you want to learn then learn from people who know their stuff , not someone who tries to confuse you with what they have plagiarized & hashed from the internet .

https://bergerbullets.com/hitting-ta...at-long-range/

Secrets of the Houston Warehouse — Read this classic article « Daily Bulletin

And then just practice the basics , the rest will follow .

Yes, but it was not a deer. Do you encounter a lot of Tahr and Chamois you can shoot?

Clean or no trigger

Quote:

---

Originally Posted by 2post

Clean or no trigger

---

And you are implying mine was not?

What do you limit yourself to?

To me you need to consider both the precision and accuracy of you're entire set up, and the accumulative effects of both to determine the distance you can comfortably take a shot. That includes the gear and the nut behind the butt, the latter often being the major one. With the nut, you need to factor in consistency and ability to read and correct for the situation and conditions you are shooting. So field accuracy and precision are both variable and both decrease (in absolute terms) with range.

Now back to the original post. Bedding is not always the issue. For instance with my little 223 that I bought cheap because it's precision was 4" at 100m, which didn't worry me in the slightest for it's intended purpose of bowling a pig at 30m. But I wanted it to be quiet so it went to Gunworks without me even firing a shot through it, but I did get mudgripz to play at the range first. Robbie picked it up and demonstrated the flex in the stock by leaning on it. Anyway, I picked it up after getting it quietened and took it to the range and all the three shot groups were between 11-13mm at 100m. Now this was an eye opener for me as a pretty new shooter, with no coaching, who thought I'd be pushing to ever get even anywhere near 1moa. And that rifle, in it's flimsy plastic stock, still isn't bedded. But the changes in mass, recoil, and the stiffening effect of the over barrel suppressor on the thin barrel had a huge effect on dampening the harmonics in both the action and the stock.

And this, I think is part of what Tussock was talking about. Bedding may help, but it may not. Other things may help, or they may not. A proper diagnosis is required and Robbie just knew what the issue was likely to be through knowledge and experience.