Thermal elevation test.

Printable View

07-12-2023, 06:45 AM
Trout

1 Attachment(s)

Thermal elevation test.

Thort il test my elevation with thermal clipon on in the dark.Got a small tin filled with hot water and taped it up.Had a old sock in fridge so that was stone cold.Had tin in sock hung on target board over my target.
Shot to left of tin,only using horizontal line right of dot for elevation.Didnt want to shoot my tin up.Zero elevation ok at a 100yds,very good at 200yds n ok group.Not that I was shooting for groups only elevation checks.
Attachment 238825
Had scope on 5x for 200yds.I reckn 200yds far enough for shooting in the dark.Could shoot further but don't need to.
07-12-2023, 07:51 AM
Marty Henry

Is that a "mildot" reticle and did you use holdover? as your 100 and 200 poi are the same, you've got to be pleased with that
07-12-2023, 07:58 AM
Trout

Just one dot in centre of cross hairs.Dialed scope up 2 inches for 200yds.Just cross hair on the right of dot on tin.Could see hair line clearly on centre on hot white tin half way up tin.
07-12-2023, 09:07 AM
Tahr

Thats good. What make of clip on?
07-12-2023, 09:34 AM
Trout

Quote:

Originally Posted by Tahr

Thats good. What make of clip on?

InFiRayCH50 V2.
07-12-2023, 10:01 AM
No.3

Heard a guy use a tealight candle for something similar - but would not of thought about dialling a few to one side to test. That's not a bad idea!
07-12-2023, 10:09 AM
Trout

Quote:

Originally Posted by No.3

Heard a guy use a tealight candle for something similar - but would not of thought about dialling a few to one side to test. That's not a bad idea!

No I didn't dial to one side,just aimed where bullits hit.Just keeped horizontal of cross on centre of hot tin half way up tin.Widis section.
07-12-2023, 10:16 AM
Trout

1 Attachment(s)

This where I aim.
Attachment 238842
24-12-2023, 04:54 PM
Trout

1 Attachment(s)

Manage to get a 300yds practical drop group in the darkness.Only 9.3 inchs,but iv off set my 100yd zero up 1 inch.I reckn the weight of the 630gram clipon slowing down the recoil bounce 5or 6mm when firing= 1" at a 100yds.So what iv done works for
100yds zero
200yds dial up 2 inchs.
300yds dial up 3 inchs
400yds dial up 6 inchs.
If I back set my zero, it be day time zero.
Doesn't matter in day time I know I'm 1inch high of zero anyhow.
Green dots my drop from top of hot tin.
Attachment 240121