Two guns Two weeks old

After a rather empty gun safe for two long I decided I wanted one gun that was light, cheap to run, cheap to make, and I could use for every hunting occasion, brake on for the tops, in me pocket for the bush:)
I wanted something with enough juice to tip them at 700yards.
Terminator Products sorted me this in no time, 7/375R 7.6lbs VX6 on the top
Attachment 9971
So after 3 shots to zero at 100, its off up the hill to try and shoot some steel.
Forum member 338 has also just brought a Terminator Products 338 Edge and wanted to see what it shots like at 1000.
These photos are of our first shots not dressed up in anyway.
338 sorting his stuff out:thumbsup:
Attachment 9972
First 3 shots with the 7/375 at 745yards, 3 shots under 3 inches:) holy crap that shoots ok your turn
Attachment 9973
338's Group at 1065 yards
Attachment 9974
We will update this post as we fire the guns more and stretch out these ranges
Thanks Kiwi Greg for making two light lady's that seem to shoot rather well considering it's very early days:thumbsup:

Nice shooting Brads. What barrel is on your 7mm?

kj

Would have been a good group if it wasn't for that flyer ;)

Quote:

---

Originally Posted by kimjon

Nice shooting Brads. What barrel is on your 7mm?

kj

---

Standard Remy barrel mate,
Started life as a 7mm Rem Mag

Good shooting!

Quote:

---

Originally Posted by stug

Good shooting!

---

Nice stock as well mate:)

good stuff the both of you.
You had some rain then?:yarr:

Choice Brads i bet you sunk some piss after that sucsesful day aye?.nice tidy looking rig two.

Quote:

---

Originally Posted by Neckshot

Choice Brads i bet you sunk some piss after that sucsesful day aye?.nice tidy looking rig two.

---

Na mate the in laws arrived:(
But 388 did get me some time away from it all:)

Quote:

---

Originally Posted by BRADS

Na mate the in laws arrived:(
But 388 did get me some time away from it all:)

---

Ahh the monster inlaws:thumbsup:.I was plugging some steel this arvo .looked clear up yor ways,we were fucking around in the drizzel.The rangey works a treat the mate has a loupy rx-800 and its just as accurate as that out to 600 -700 hundy so long as im keeping it steady

Quote:

---

Originally Posted by 338

Would have been a good group if it wasn't for that flyer ;)

---

Mate that is a top group even with a flyer

extremely impressive 1000yrd group!

Damn good shooting !

What size is that VX 6 Brads ?

Sent from my GT-I9100 using Tapatalk 2

Quote:

---

Originally Posted by redbang

Damn good shooting !

What size is that VX 6 Brads ?

Sent from my GT-I9100 using Tapatalk 2

---

3-18x44 mate, it's a good mag range for most work, have to say the glass is not bad either:)
I wish they made alumina caps for them thow:(

Beautiful rifles and groups

where did you get the vx6 from? and what sort of $$$?

Quote:

---

Originally Posted by Freezer

where did you get the vx6 from? and what sort of $$$?

---

Kiwi Greg sourced the scope, as a full build package.He seems to get glass a lot cheaper than I can.

Quote:

---

Originally Posted by Freezer

where did you get the vx6 from? and what sort of $$$?

---

Richmond sterling sports normally give the best price around :)

Sent from my GT-I9300T using Tapatalk 2

Quote:

---

Originally Posted by tui_man2

Richmond sterling sports normally give the best price around :)

Sent from my GT-I9300T using Tapatalk 2

---

+1, James is pretty good with his pricing

Quote:

---

Originally Posted by mikee

+1, James is pretty good with his pricing

---

He certainly is :)

Looking good guys :)

Quote:

---

Originally Posted by 199p

Looking good guys :)

---

Your absence was noted and put in the range book:)

Custom or no custom, factory barrel or new, what looks like a under 100mm group at over 1k is awesome. I'd be so happy if I could manage that with any of my rifles.

faaark me rigid and call me nigel -that is some spectacular shooting.anyone know how to tune an escort shotgun do do a similar job on geese &ducks.Optimist is my middle name:ORLY:

Damn fine shooting you guys.

Damn that 700 bolt handle is sexy.

Awesome shooting guys, much wind that day or nah? Brads just curious as you said you were after something cheap to run, what does that brass sting ya for a pack? Cheers

Quote:

---

Originally Posted by Link

Awesome shooting guys, much wind that day or nah? Brads just curious as you said you were after something cheap to run, what does that brass sting ya for a pack? Cheers

---

maybe 3-4 mph of wind. A bag of 50 is around $100:) 7-8 firings per brass it's rather good value:)

Grass is looking better

Quote:

---

Originally Posted by scottrods

Damn that 700 bolt handle is sexy.

---

I reckon it looks a bit fragile? I've had to open my Rem with a mallet after firing some stupid loads (not overloaded just too lazy to bump FL size the brass). Its a lesson you learn quickly but I bent my bolt handle. Fortunately the solder did not shear off. Food for thought BRADS?
Great shooting too.

It a dilema, eh.

I thought "what the hell would you want one of them for", and before that thought fully evaporated it turned into "shit, I would love to own one".

Its all a bit foreign to me, being an old fart. But there is still something in me that says "go on, be a bit risky". :)

Hmm, I want one!!

What size is the case head? Would it be the same as my WSM bolt?

Quote:

---

Originally Posted by puku

Hmm, I want one!!

What size is the case head? Would it be the same as my WSM bolt?

---

Yep standard magnum bolt face:)
It is as long as a 7mm Rem mag.

Whats the load and velocity Brads?

Chris

Mate you should try using a rifle!!! Man then yud be dangerous

Quote:

---

Originally Posted by crnkin

Whats the load and velocity Brads?

Chris

---

2225, 162 AMAX at 3250fps