Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Night Vision NZ Terminator


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 19
Like Tree22Likes

Thread: Using a shooting sling.

  1. #1
    Member Sh00ter's Avatar
    Join Date
    Apr 2017
    Location
    Pahiatua
    Posts
    610

    Using a shooting sling.

    I found a free ebook that gives a pretty good run down on using a sling for shooting.

    Slings are far from perfect but offer some advantages over a bipod or rest and can serve as more than just a carry strap.

    Download page, https://rifle-craft.com/a/downloads/...0159fd5d165767

    If that doesn’t work here’s the main page. The book is free but you will have to go through the checkout process.
    https://rifle-craft.com/collections/...ing-sling-book
    Tuidog, Steelisreal, Ooops and 1 others like this.
    Hit the hills, live the BushLife!

    https://bushlifenz.com

  2. #2
    Member
    Join Date
    Feb 2020
    Location
    Scotland
    Posts
    1,214
    Read that a few months ago and made some slings to try the concept, a few things to mention:

    1- You need to make sure your sling swivels and stock can withstand the tension exerted by this style of sling.

    2- The 'proper' M1907 sling is a bloody heavy contraption that isn't really fit for purpose on a hunting rifle.

    3- The alternatives are OK (he came up with a design that was a good compromise) but the length of the sling will always be critical, and for overall stability you can't beat a bipod.

    Better to have an adjustable sling for carrying the rifle in relative comfort/ease, but good to know some of these techniques.

    A few people I know (then myself) have gone for the TAB gear slings with flush cup mounts in the stock on the opposite side of bolt; they are good if you can get them but a little heavy.
    Moa Hunter likes this.

  3. #3
    Member Sh00ter's Avatar
    Join Date
    Apr 2017
    Location
    Pahiatua
    Posts
    610
    @caberslash All great points.
    Bipods definitely have their place.
    I'm using the magpul RLS sling and really like it. It works great as a carry strap and to stabilize the rifle but it can slip a bit on the shoulder.
    caberslash likes this.
    Hit the hills, live the BushLife!

    https://bushlifenz.com

  4. #4
    Gone but not forgotten
    Join Date
    Jul 2014
    Location
    Porirua
    Posts
    87
    Photo attached of a combined carry/shooting sling I designed and made myself. Easy enough to make, using off-the-shelf components, and works very well in the field. I can supply more details if anyone is interested.

    Attachment 148993

    The total length and the length of the front loop are readily adjustable.
    Attached Images Attached Images  
    Steve123, winaa, Sh00ter and 1 others like this.

  5. #5
    Member
    Join Date
    Feb 2020
    Location
    Scotland
    Posts
    1,214
    Quote Originally Posted by redrover View Post
    Photo attached of a combined carry/shooting sling I designed and made myself. Easy enough to make, using off-the-shelf components, and works very well in the field. I can supply more details if anyone is interested.

    Attachment 148993

    The total length and the length of the front loop are readily adjustable.
    More info would be great!

    Is that an older Sako?

    Nice.

  6. #6
    Banned
    Join Date
    Mar 2016
    Location
    auckland
    Posts
    2,453
    I used a ching sling for a while but found I couldn't rig up quick enough for offhand shots and preferred an improvised rest when afforded more time
    Cordite likes this.

  7. #7
    Gone but not forgotten
    Join Date
    Jul 2014
    Location
    Porirua
    Posts
    87
    Quote Originally Posted by caberslash View Post
    More info would be great!

    Is that an older Sako?

    Nice.
    I'll put the details together in the next few days and post them here. I thought I had a good diagram of it on my computer but when I looked, it was a previous design which didn't work quite so well, so I'll have to start drawing from scratch. How it works is simple enough with a clear drawing, but without one could be a bit like a Chinese string puzzle.

    Yes, the rifle in the photo is a re-barrelled Sako AI.
    Steve123 and caberslash like this.

  8. #8
    Member
    Join Date
    Apr 2016
    Location
    Rotorua
    Posts
    474
    Quote Originally Posted by redrover View Post
    I'll put the details together in the next few days and post them here. I thought I had a good diagram of it on my computer but when I looked, it was a previous design which didn't work quite so well, so I'll have to start drawing from scratch. How it works is simple enough with a clear drawing, but without one could be a bit like a Chinese string puzzle.

    Yes, the rifle in the photo is a re-barrelled Sako AI.
    Sounds good I'd be interested as well.
    BC doesn't matter, until you need to dial

  9. #9
    Member Cordite's Avatar
    Join Date
    May 2017
    Location
    NZ Mainland (Dunedin)
    Posts
    5,531
    Moa Hunter likes this.
    An itch ... is ... a desire to scratch

  10. #10
    Member
    Join Date
    Sep 2017
    Location
    Wellington
    Posts
    1,734
    Is it just me or is it a bit ironic the cover picture rifle has a bipod on it?

  11. #11
    Member
    Join Date
    Sep 2013
    Location
    Taupo
    Posts
    1,405
    I used a 1907 sling for years. It's especially good when you are taking sitting shots in tussock - too tall for a bipod, so just sling up and get it done.

    I've recently discovered that a Uncle Mikes mountain sling can be made into a good shooting sling by just putting the loop on the front swivel, preset to the right length for you. Just undo the rear swivel and get into it when the need arises.

  12. #12
    Gone but not forgotten
    Join Date
    Jul 2014
    Location
    Porirua
    Posts
    87
    Finally got a detailed drawing of my sling design finished. It is made from 25mm wide synthetic webbing. Drawing and a photo below. The design is basically limited to 25mm width, because it is difficult to find both suitable 32mm wide webbing (most of what is around is far too thin and floppy) and 32mm wide fittings.

    25mm webbing also comes in a variety of thicknesses - what is required is stuff about 1.6 to 1.7mm thick. Anything much thinner is too floppy. The Tri-Glide marked A on the drawing sets the working length of the front loop and it must provide a tight grip, which may not be achievable with thinner webbing - and you definitely do NOT want it slipping. On the other hand, it may be difficult to pass two layers of webbing much thicker than about 1.8mm through the Tri-Glides.

    The other fitting required is a Ladder Lock, marked C on the diagram.As made, they have a rounded tab at one end (see photo) but in this application it serves no useful purpose so I have cut it off.

    There are various brands of Tri-Glides and Ladder Locks around, and they can be found in shops dealing in outdoor equipment, marine equipment, general hardware, and even in some drapers, such as Spotlight. They are all very similar, but not necessarily identical. It is clear in the photo that some Tri-Glides are shorter than the others, and provide a tighter grip.

    The only real work required is to make the necessary keepers. I made mine out of pieces of the same webbing as used for the slings. Made a ‘former’ out of layers of cardboard which was 25mm wide and 3mm thick, wrapped the webbing around it, temporarily pinned it in place, and glued it up using a hot glue gun. Inevitably some glue squeezed out, so I tidied up that and the raw outer end with more glue and small electric soldering iron. Other types of glue might work just as well or better.

    Because the strap is one piece and is not permanently fastened anywhere, it is easy to adjust the positions of the fittings to suit the individual rifle/shooter. The top sling in the photo was made for a rifle with longer than usual spacing between the swivel bases, and it also has an extra keeper placed between fittings C and D.

    These slings are easy to use in the field. Turn the front portion 1/4 turn to the left, pass left arm through the front loop and place it around the upper arm, and draw keeper F down firmly on the arm. Take up shooting position with sling passing under left hand, where it will prove a great aid to steady holding. Name:  5256 Slings etc.jpg
Views: 422
Size:  779.8 KBName:  New 1 piece - C.jpg
Views: 394
Size:  117.5 KB
    winaa, ROKTOY, Flyblown and 3 others like this.

  13. #13
    Member
    Join Date
    Apr 2016
    Location
    Rotorua
    Posts
    474
    Thanks @redrover that's a very detailed and helpful post.
    BC doesn't matter, until you need to dial

  14. #14
    Member Flyblown's Avatar
    Join Date
    Feb 2018
    Location
    Waikato
    Posts
    3,339
    Yup @redrover that’s a fantastic bit of guidance there. Love a good shooting sling.
    Just...say...the...word

  15. #15
    Member
    Join Date
    Aug 2012
    Location
    Otago
    Posts
    1,559
    Awesome @redrover thank you.

    Where did you buy all the parts?
    "The generalist hunter and angler is a well-fed mofo" - Steven Rinella

 

 

Similar Threads

  1. New sling
    By madjon_ in forum Projects and Home Builds
    Replies: 7
    Last Post: 15-04-2020, 01:08 PM
  2. Auckland Shooting Range Shooting
    By Dermastor in forum Shooting
    Replies: 79
    Last Post: 15-02-2019, 10:26 PM
  3. Slip on Rifle Sling/ Harnessed Sling
    By forrestwood in forum Firearms, Optics and Accessories
    Replies: 6
    Last Post: 27-10-2015, 04:22 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!