Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator DPT


User Tag List

+ Reply to Thread
Results 1 to 15 of 99
Like Tree7Likes

Thread: What's the Deal?

Hybrid View

Normie What's the Deal? 26-03-2013, 02:07 PM
Wirehunt Was atmospheric conditions... 26-03-2013, 02:19 PM
StrikerNZ That would be my guess too.... 26-03-2013, 02:24 PM
Kiwi Greg +1 Were there angles... 26-03-2013, 02:31 PM
Normie I'm not sure what baro was I... 26-03-2013, 02:50 PM
CreepingDeath Ive got a master chrony and... 26-03-2013, 03:00 PM
Normie Nope. Was definitely meters... 26-03-2013, 03:04 PM
sneeze Unless the worlds about to... 26-03-2013, 06:34 PM
R93 +1 Chrono, zero or your... 26-03-2013, 08:38 PM
Normie I re-zeroed minutes before... 26-03-2013, 10:35 PM
R93 That leaves 2 other things to... 26-03-2013, 10:48 PM
CreepingDeath Do you have a load zero for... 26-03-2013, 11:44 PM
Normie Not sure what the book speed... 27-03-2013, 08:08 AM
R93 There are many variables I... 27-03-2013, 08:18 AM
sneeze Bullets on target don't lie... 27-03-2013, 06:59 PM
R93 Too much light is as bad as... 27-03-2013, 07:08 PM
sneeze Yes might help but you just... 27-03-2013, 07:23 PM
R93 What do you mean by that... 27-03-2013, 08:57 PM
mucko ADI book speed is 2675 in a... 29-03-2013, 05:24 AM
Normie Wow. That's a lot slower than... 27-03-2013, 08:47 AM
Wirehunt What weight bullet R93? 27-03-2013, 11:30 AM
R93 140 Amax Sent from my... 27-03-2013, 06:25 PM
sneeze Yes dark is good with the ir... 27-03-2013, 09:08 PM
R93 Yep, sounds good. I will... 27-03-2013, 09:22 PM
veitnamcam I watched my f1 jump 150 fps... 27-03-2013, 09:16 PM
sneeze Thats it, they serve a... 27-03-2013, 09:23 PM
LJP I always use Brian Litz Bc's.... 28-03-2013, 07:53 AM
gimp I believe that bullets CAN... 29-03-2013, 01:22 AM
Norway My guess. Can't argue with... 29-03-2013, 03:16 AM
gimp What zero range for the... 29-03-2013, 05:06 AM
Normie Thanks for the help. Seems... 29-03-2013, 09:09 AM
L.R At 2644fps I doubt if the G7... 29-03-2013, 08:34 AM
gimp You have to drop it to below... 29-03-2013, 09:02 AM
L.R I agree that the G7 wont be... 29-03-2013, 10:52 AM
Normie Is the G7 BC velocity... 29-03-2013, 08:57 AM
gimp Much much less so than G1,... 29-03-2013, 09:03 AM
gimp Data at 650m was only on... 29-03-2013, 09:39 AM
Normie Yes, muzzle vo was fudged... 29-03-2013, 10:14 AM
Normie Thanks LR. I might take you... 29-03-2013, 11:33 AM
R93 Is it a custom or factory... 29-03-2013, 11:56 AM
L.R If that load is doing 2500fps... 29-03-2013, 11:51 AM
gimp I was shooting 42gr of 2209... 29-03-2013, 11:52 AM
Normie R93 it's a customish rifle.... 29-03-2013, 12:03 PM
Normie When Abe built my barreled... 29-03-2013, 12:04 PM
R93 No not really. Should be... 29-03-2013, 12:06 PM
L.R May explain early pressure... 29-03-2013, 12:17 PM
Norway Shooting Chrony is not bad,... 29-03-2013, 08:04 PM
gimp I know :) no problems with... 29-03-2013, 10:45 PM
Normie My scales are shit really and... 29-03-2013, 11:59 AM
gimp Yeah, I saw that, looked like... 29-03-2013, 12:07 PM
gimp It also could be the 'bullets... 29-03-2013, 12:21 PM
L.R Yes Gimp all of that sounds... 29-03-2013, 12:00 PM
gimp If he's getting pressure at... 29-03-2013, 12:04 PM
Normie Just done in JBM. ANything... 29-03-2013, 12:06 PM
gimp Missing line of sight... 29-03-2013, 12:14 PM
L.R Id say Normies barrel is... 29-03-2013, 12:13 PM
gimp It could be an issue of the... 29-03-2013, 12:17 PM
L.R I dont agree with you on... 29-03-2013, 12:20 PM
gimp We're talking a 22" .260 here... 29-03-2013, 12:26 PM
Norway Short barreled 6,5x284 out to... 29-03-2013, 08:11 PM
Normie Zero is 10 mil up from bottom... 29-03-2013, 12:39 PM
tui_man2 On the tighter bore barrels I... 29-03-2013, 12:52 PM
R93 Nothing to do with the bore... 29-03-2013, 12:46 PM
Normie Case length is about the... 29-03-2013, 01:23 PM
Wildman I get an average of 2712fps... 29-03-2013, 03:21 PM
Dead is better Thats what i get with my... 29-03-2013, 06:13 PM
jakewire That's interesting as I get... 29-03-2013, 09:33 PM
gimp Different rifles, brass,... 29-03-2013, 10:39 PM
L.R May as well have a 260. Same... 29-03-2013, 08:14 PM
Norway No you lose approximately 30... 29-03-2013, 08:46 PM
tui_man2 Sorry normie for the steel an... 29-03-2013, 11:01 PM
gimp 1: it was 4" 2: a single... 29-03-2013, 10:38 PM
Norway No you lose 30 msec doing... 29-03-2013, 08:44 PM
Normie What about parallax? Could it... 09-04-2013, 09:41 PM
gimp maybe. 09-04-2013, 10:35 PM
L.R Fuck Tussock, I didn't... 11-04-2013, 11:49 AM
Toby Does that make fluting a... 11-04-2013, 12:54 PM
gimp Lighter weight without... 11-04-2013, 01:03 PM
Toby Would having barrels that are... 11-04-2013, 01:04 PM
tui_man2 And weight Sent from my... 11-04-2013, 01:06 PM
Kiwi Greg Thanks Tussock I have been... 11-04-2013, 01:30 PM
gimp Yeah I'm not really into... 11-04-2013, 01:16 PM
Gillie I am not sure I am following... 11-04-2013, 02:45 PM
Nibblet I would agree with you... 11-04-2013, 03:46 PM
Nibblet Just some light thermal... 11-04-2013, 03:52 PM
Savage1 A heavier barrel also offers... 11-04-2013, 09:09 PM
veitnamcam If you take the same quantity... 11-04-2013, 10:39 PM
sneeze So after seven pages we can... 12-04-2013, 05:46 PM
veitnamcam Finally someone who... 12-04-2013, 05:51 PM
veitnamcam Yes and no, a light and heavy... 11-04-2013, 10:36 PM
veitnamcam The coffee analogy Sent... 12-04-2013, 07:49 AM
Nibblet Or was it too much coffee... 12-04-2013, 06:42 PM
Normie I don't have milk in my... 12-04-2013, 09:12 PM
veitnamcam My attempt at laymans terms... 12-04-2013, 09:25 PM
veitnamcam And its hard to make a cup of... 12-04-2013, 10:36 PM
  1. #1
    R93
    R93 is offline
    Member R93's Avatar
    Join Date
    Feb 2012
    Location
    Westland NZ
    Posts
    16,102
    Quote Originally Posted by Normie View Post
    Not sure what the book speed is but I'd imagine I'm slower than it should be. The day was perfect for the chrony too. Nice clear day 24 degrees or so in the middle of a paddock.

    The powder used is ADI 2209 so fairly temp stable.

    If it helps my load is
    Lapua .260 Brass
    140gr A-Max
    42gr AR2209
    CCI BR primer

    22" MAB 1:8 barrel
    There are many variables I know but I used 46grs 2209 in my .260AI and only got 2820fps thru a 24" barrel with the A max. For the same charge in RL-17 I get 2920ish with the same projectile.
    Wirehunt likes this.
    Do what ya want! Ya will anyway.

 

 

Similar Threads

  1. PLB - Buying Deal
    By faregame in forum NZHS Bulk Buying Section
    Replies: 51
    Last Post: 23-07-2015, 04:00 PM
  2. food deal for the roar?
    By scottrods in forum Gear and Equipment
    Replies: 6
    Last Post: 17-03-2013, 02:05 PM
  3. Ok deal for lefties looking for a new rifle
    By JoshC in forum Firearms, Optics and Accessories
    Replies: 0
    Last Post: 17-01-2013, 05:56 PM
  4. How to deal with Poachers???
    By BRADS in forum Hunting
    Replies: 50
    Last Post: 21-11-2012, 09:41 PM
  5. HK deal
    By gimp in forum Firearms, Optics and Accessories
    Replies: 15
    Last Post: 21-08-2012, 08:33 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!