Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

DPT Alpine


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 22
Like Tree1Likes

Thread: Whats going wrong...

  1. #1
    unit moonhunt's Avatar
    Join Date
    Dec 2011
    Location
    warkworth
    Posts
    1,471

    Whats going wrong...

    Had a play with my rifle finaly today, and here is what happens,fired 3 shots with 80gr,then 3 with 55gr,was not happy with grouping, so had another go atfter a break, started in the same fashion

    Here is the/my problem, 1st shot way left then next 2 ok,photo shows back the front, far right target is first 3 shots, 1st shot not even on paper,then next 2 beter, same again next 2 targets
    Has to be something im not doing right

    Name:  Target.jpg
Views: 553
Size:  133.8 KB
    Rule 4: Identify your target beyond all doubt
    OPCz

  2. #2
    Member
    Join Date
    Apr 2012
    Location
    canterbury
    Posts
    1,663
    factory ammo?
    action tight?

  3. #3
    Member
    Join Date
    Jul 2012
    Location
    Galatea
    Posts
    1,099

    Re: Whats going wrong...

    Whats the gun/scope/rings . Without anymore info sounds like a munted scope

    Sent from my GT-I9300 using Tapatalk 2

  4. #4
    Impure Lead Flinger
    Join Date
    Dec 2011
    Location
    Greymouth
    Posts
    1,405
    Screws Floating scope Bedding check in that order

  5. #5
    unit moonhunt's Avatar
    Join Date
    Dec 2011
    Location
    warkworth
    Posts
    1,471
    80 grain Federal, T3 lite 243, rings dont know and scope(how do i say it with out you hearing) nikko stirling dimond
    Bi pod and rolled towel at back of stock
    My mate had a shot and was bang on, he seems to think its me

    Tight action?? is that when closing bolt there is some resistance? all smooth and feels good when i close it
    Rule 4: Identify your target beyond all doubt
    OPCz

  6. #6
    Impure Lead Flinger
    Join Date
    Dec 2011
    Location
    Greymouth
    Posts
    1,405
    Take scope off and check mount screws under rings to, people often give them a miss cos they cant be bithered rezeroing...

  7. #7
    unit moonhunt's Avatar
    Join Date
    Dec 2011
    Location
    warkworth
    Posts
    1,471
    Thats something i can do and will have a look at, i am also going to get a sand bag for the back to rest on before the next try
    Rule 4: Identify your target beyond all doubt
    OPCz

  8. #8
    Fisher and Hunter leathel's Avatar
    Join Date
    Dec 2011
    Location
    Waikato.
    Posts
    793
    Bedding whats that like?

    have you had the rifle out of the stock?

    One rifle I had did that for a bit, Bedded it and it was fine

    Scope mounts etc worth a check too

    Loosen the action screws sit the rifle vertical so the recoil lug is against the stock bed and re-tighten would be my first move
    Fishing ... Hunting its all good

  9. #9
    Member zimmer's Avatar
    Join Date
    Oct 2012
    Location
    Waikato
    Posts
    4,986
    Quote Originally Posted by moonhunt View Post
    80 grain Federal, T3 lite 243, rings dont know and scope(how do i say it with out you hearing) nikko stirling dimond
    Bi pod and rolled towel at back of stock
    My mate had a shot and was bang on, he seems to think its me
    Tight action?? is that when closing bolt there is some resistance? all smooth and feels good when i close it
    "My mate had a shot and was bang on, he seems to think its me"

    Does this statement mean the groups were good, ie no first shot fliers, when your mate shot the rifle?
    Last edited by zimmer; 29-10-2012 at 10:27 AM.

  10. #10
    unit moonhunt's Avatar
    Join Date
    Dec 2011
    Location
    warkworth
    Posts
    1,471
    Zimmer yes, his first spot on, is there any reason why someone pulls left rather than right
    No never had anything apart, have shot a couple of animals no problem last few months and way back when i shot paper last it was fine
    Rule 4: Identify your target beyond all doubt
    OPCz

  11. #11
    Member
    Join Date
    Jan 2012
    Location
    Taupo
    Posts
    754
    As you said it was alright for your mate i would suspect its something you are doing, but to be sure give it to someone else for a shot.

  12. #12
    unit moonhunt's Avatar
    Join Date
    Dec 2011
    Location
    warkworth
    Posts
    1,471
    First thing i will do is give it a good scrub out and try again with a beter back support,differant day,differant mood
    Rule 4: Identify your target beyond all doubt
    OPCz

  13. #13
    Baz
    Baz is offline
    Long-ranger Baz's Avatar
    Join Date
    Jan 2012
    Location
    Waikato
    Posts
    284
    Wearing ear protection at all times? you will be surprised what difference it makes.

  14. #14
    Member
    Join Date
    Dec 2011
    Posts
    1,517
    How old is the scope ,has it had any knocks ?
    Gun control means using both hands

  15. #15
    unit moonhunt's Avatar
    Join Date
    Dec 2011
    Location
    warkworth
    Posts
    1,471
    i forgot to say its suppessed, but no dont wear any plugs,scope second hand when i got it with rifle,plan to upgrade it one day
    Rule 4: Identify your target beyond all doubt
    OPCz

 

 

Similar Threads

  1. Right place, wrong time?
    By kimjon in forum Hunting
    Replies: 3
    Last Post: 27-07-2012, 10:45 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!