Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator Alpine


User Tag List

+ Reply to Thread
Results 1 to 9 of 9
Like Tree5Likes
  • 5 Post By StreamSide

Thread: Hi From StreamSide

  1. #1
    Member
    Join Date
    Sep 2021
    Location
    Auckland
    Posts
    2

    Hi From StreamSide

    Hi all was advised by James (thank you James) to provide an introduction so here we go.

    Brought up in the central NI and spent my youth venison gathering and trout fishing. We were not people of means so the venison and trout were a staple. That's why I called it gathering.
    Times are better now. Have an engineering degree and live in upper NI.
    Have been loading for my 308 for nigh on 40 years, and have dabbled in archery. Hold a few titles for sporting small bore as well but do not do that anymore.
    Did motocross, enduros for a while and love working with bike motors for performance.

    Have been downsizing my gun cabinet for a few years now as do not want excess guns and also just not getting out so much as I used to.
    Have a superb Model 2 1957 Brno with night vision, an FX22 Streamline PCP, a reliable Liege SBS 12G and BRNO 308 601. Am also working on a Styre Mauser 7x57. True flite barrel, Mike Collings stock and various other enhancements.
    Will be posting a built project record for the Mauser in the near future as this will get me motivated into finishing the rifle. Some would say it was a crime to cut up a good working original 1913 Styre K98, but I new no better at the time, and wanted to create a nice light rifle for my wife. She secured a nice stag with it in it first reincarnation ( shortened barrel, Modified Bolt, plastic stock), so that to me made it worthwhile.
    Have included a couple of images as a teaser below, the action photo is with the original barrel. I have done all the jeweling all the new floor plate hinge and hinge release engineering. The bolt was modified professionally. Made a new trigger (stainless with tool steel insert for sear face so the trigger sits to the rear of the guard as opposed to the middle on the standard Timneys. The stock image shows the new trigger. Have a spare bolt shroud as I imported 2 (when you still could) and used the one I like best, the other is available you some on the forum, just want what I paid which was so long ago I cannot remember, I think around 40 bucks. Still have all the original sights, trigger and shroud etc, and they can be free to a good home, the sights were sweated off the original barrel, so include the base rings that encircle the barrel in undamaged form.

    Anyway, will be posting some of my informal tests shortly as I have just spent a whole day sorting out a .22 Stoeger RX40 Nitro piston that may be of interest to some members, mainly to do with finding the best pellet. Was extremely enlightening.
    Have an FX 22 PCP and constantly out with doing rabbit control in neighbouring land. They are epidemic in Sth AK currently. Am averaging 20-30 every week. Some nights have got 50+. Last year got around 1200.
    The FX Streamline is more effective than my Brno 22 not just due to accuracy, but noise is zero so you can shoot around consenting neighbours without scaring them, so you get access to a lot more rabbits to terminate, surgical accuracy and at 30Ftlbs, lethal for rabbits. Running cost is a 10th of a 22RF. Have treid to included a video (MP4), but not sure if I did it correctly, as it is not a youtube video. Maybe not correct to include it in the post, but will try. Update..... did not seem to load so will have to put on youtube, unless someone can otherwise advise how to publish a video here. With night vision and and a PCP, rabbits generally do not bolt once the lead starts flying they just look at the casualties then keep eating.

    I do not buy/sell guns as a rule, but as mentioned above am downsizing cause I am simply getting on in life and do not have the need for lots of guns/rifles.
    Cheers
    Attached Images Attached Images    
    Woody, Micky Duck, Mathias and 2 others like this.

  2. #2
    Member
    Join Date
    Apr 2017
    Location
    The 'Naki
    Posts
    2,479
    Welcome. Impressed (easily done tho ) You should enjoy it on here. The 7x57 sounds like a very nice project. Mine is a more mundane Interarms Mark X but nice to shoot.
    I know a lot but it seems less every day...

    Due to the exorbitant cost of reloading components, warning shots will not be given.

  3. #3
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    24,737
    welcome aboard....rifle builds are always a pleasure to view..... by keeping and passing on the bits off original....me thinks you have appeased the original makers of rifle...they would be proud to see you using rifle still instead of it rusting at bottom of some field or bog.
    it never fails to amaze me seeing these old war horses all tarted up in new finery footing it with the best....and any still in drab old work wear ,near to original selling for more than a brand new rifle n scope combo.
    someone may be able to use your un needed bits to take something bubbafied and bring it back into working order...good on you for offering them up.

  4. #4
    Member
    Join Date
    Dec 2019
    Location
    Christchurch
    Posts
    150
    Welcome Streamside, a very interesting introduction with a cool range of rifles and projects underway. Personally, I've been given some great advice and opportunities from members of this forum. I love posting my successful hunts ( approaching 10 only ), but enjoy the threads about some of the older rifles, some of which I have in the safe here at home. Always learning... Go well.

  5. #5
    Member Mathias's Avatar
    Join Date
    Oct 2015
    Location
    Canterbury, home of the big Rakaia Red Stag
    Posts
    4,502
    Welcome aboard Streamside

  6. #6
    OPCz Rushy's Avatar
    Join Date
    Jun 2012
    Location
    Nor West of Auckland on the true right of the Kaipara River
    Posts
    34,234
    Welcome aboard
    It takes 43 muscle's to frown and 17 to smile, but only 3 for proper trigger pull.
    What more do we need? If we are above ground and breathing the rest is up to us!
    Rule 1: Treat every firearm as loaded
    Rule 2: Always point firearms in a safe direction
    Rule 3: Load a firearm only when ready to fire
    Rule 4: Identify your target beyond all doubt
    Rule 5: Check your firing zone
    Rule 6: Store firearms and ammunition safely
    Rule 7: Avoid alcohol and drugs when handling firearms

  7. #7
    Member
    Join Date
    Jun 2014
    Location
    CNI
    Posts
    5,907
    Hello StreamSide
    Summer grass
    Of stalwart warriors splendid dreams
    the aftermath.

    Matsuo Basho.

  8. #8
    Member Marty Henry's Avatar
    Join Date
    Oct 2014
    Location
    Tararua
    Posts
    7,073
    One of the best introductions in a long time sounds like you will fit right in. (-:

  9. #9
    Member
    Join Date
    May 2018
    Location
    Porirua
    Posts
    1,335
    Welcome aboard. I always enjoy reading threads on old rifles especially some of the details people on this forum know about identifying rifles. The only thing better is seeing dogs and hunters working together.
    Great introduction.
    James.
    Remember the 7 “P”s; Pryor Preparation Prevents Piss Poor Performance.

 

 

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!