Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Night Vision NZ DPT


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 25
Like Tree53Likes

Thread: 18" 6.5 PRC

  1. #1
    Terminator Products Kiwi Greg's Avatar
    Join Date
    Dec 2011
    Location
    Nelson
    Posts
    6,678

    18" 6.5 PRC

    Just got this Tikka 6.5 PRC going this morning



    It has an 18" Bartlein 1-8 #2b 5R barrel



    The customer is going to the factory stock until he gets a carbon one off one of his mates



    Initial load development is done & the velocity is reasonable from the short barrel



    Pretty happy with it & its off to its owner next week
    Contact me for reloading components, brass, projectiles, powder, primers, etc

    http://terminatorproducts.co.nz/

    http://www.youtube.com/user/Terminat...?feature=guide

  2. #2
    Member
    Join Date
    Dec 2017
    Location
    Geraldine
    Posts
    371
    Where do we get a 6.5 prc chamber reamed in NZ?

  3. #3
    Member Tommy's Avatar
    Join Date
    Nov 2014
    Location
    W-BOP
    Posts
    6,530
    Tidy
    Identify your target beyond all doubt

  4. #4
    Terminator Products Kiwi Greg's Avatar
    Join Date
    Dec 2011
    Location
    Nelson
    Posts
    6,678
    Quote Originally Posted by Tribrit View Post
    Where do we get a 6.5 prc chamber reamed in NZ?
    I imported one & go gauge, along with many others over the years
    Tahr likes this.
    Contact me for reloading components, brass, projectiles, powder, primers, etc

    http://terminatorproducts.co.nz/

    http://www.youtube.com/user/Terminat...?feature=guide

  5. #5
    Member
    Join Date
    Dec 2011
    Location
    NI
    Posts
    12,732
    That's great. Im impressed that there is a real edge there over the "old" 6.5's in a shorter barrel and am happy to resile from my former scepticism about the caliber not giving a decent edge over the x55.
    veitnamcam, Seventenths and Nick-D like this.

  6. #6
    Sending it Gibo's Avatar
    Join Date
    Feb 2013
    Location
    The Hill
    Posts
    23,469
    Is this VCs one?

  7. #7
    Member
    Join Date
    Nov 2012
    Posts
    1,527
    Quote Originally Posted by Tahr View Post
    That's great. Im impressed that there is a real edge there over the "old" 6.5's in a shorter barrel and am happy to resile from my former scepticism about the caliber not giving a decent edge over the x55.
    Still not enough of an edge over my 18" .260 which does 2810fps with the 143ELDX.

    Sent from my CPH1903 using Tapatalk
    GWH, Cartman, superdiver and 1 others like this.

  8. #8
    Member
    Join Date
    Mar 2014
    Location
    Tauranga
    Posts
    2,998
    Quote Originally Posted by Kiwi Greg View Post
    Just got this Tikka 6.5 PRC going this morning



    It has an 18" Bartlein 1-8 #2b 5R barrel



    The customer is going to the factory stock until he gets a carbon one off one of his mates



    Initial load development is done & the velocity is reasonable from the short barrel



    Pretty happy with it & its off to its owner next week
    That's good practical speeds out of the 18 inch barrel.
    Uplandstalker likes this.

  9. #9
    Terminator Products Kiwi Greg's Avatar
    Join Date
    Dec 2011
    Location
    Nelson
    Posts
    6,678
    Quote Originally Posted by Gibo View Post
    Is this VCs one?
    Nope
    Gibo likes this.
    Contact me for reloading components, brass, projectiles, powder, primers, etc

    http://terminatorproducts.co.nz/

    http://www.youtube.com/user/Terminat...?feature=guide

  10. #10
    Member outdoorlad's Avatar
    Join Date
    Dec 2011
    Location
    Christchurch
    Posts
    3,010
    Hopefully tikka/Sako will put out the 6.5PRC in the future.........
    Shut up, get out & start pushing!

  11. #11
    Member
    Join Date
    Dec 2011
    Location
    NI
    Posts
    12,732
    Quote Originally Posted by 25 /08 IMP View Post
    Still not enough of an edge over my 18" .260 which does 2810fps with the 143ELDX.

    Sent from my CPH1903 using Tapatalk
    My 21" x55 is 2840 but I expect that Im on the pressure edge. Yours is fizzing, but I expect the PRC does it with a bit up its sleeve.
    dogmatix and 25 /08 IMP like this.

  12. #12
    Member
    Join Date
    Dec 2017
    Location
    Geraldine
    Posts
    371
    Quote Originally Posted by outdoorlad View Post
    Hopefully tikka/Sako will put out the 6.5PRC in the future.........
    Iv been waiting for a 85 Carbonlight in 6.5prc. If it ever happens I'm buying one immediately.

    In the meantime I'm pretty close to having a prc built on a blue printed Model 7 action.
    outdoorlad, Bill999 and GWH like this.

  13. #13
    Terminator Products Kiwi Greg's Avatar
    Join Date
    Dec 2011
    Location
    Nelson
    Posts
    6,678
    Shot it again in the weekend & its all sorted, definitely not a hot load.



    Doesn't mind the 147 ELDM either, tends to leap around a bit when the trigger is squeezed



    Its very happy with the Factory ammo, even hit the aim point for a change just shows how much the POI changes between loads especially with the drop in velocity



    Now its waiting for its trip to its new owner
    Contact me for reloading components, brass, projectiles, powder, primers, etc

    http://terminatorproducts.co.nz/

    http://www.youtube.com/user/Terminat...?feature=guide

  14. #14
    Member 300_BLK's Avatar
    Join Date
    Aug 2014
    Location
    NZ
    Posts
    3,723
    Warm Barrels!

  15. #15
    Member
    Join Date
    Apr 2020
    Location
    Wanganui
    Posts
    462
    Thanks for having this rifle built for me Greg!

    It's definitley the most accurate rifle i have owned to date and in a compact size for bush to Tops hunting!

    Here is what this rifle looks like now with the Carbon stock on it!

    Name:  IMG_20200307_164020.jpg
Views: 2470
Size:  4.25 MB

    The load development was a bit drawn out as i started using the 143eld-x seating depth from the dummy round you supplied. I was getting the odd random pressure spike. Turned out you had it jammed 0.015" into the lands. It did shoot great like that usually though.
    Check out this 318m group i shot while testing with it jammed.
    Velocity on this load is 2915fps avg.
    Name:  IMG_20200119_134920.jpg
Views: 2246
Size:  3.66 MB


    So i started again at 0.010" off the lands. Accuracy wasn't what i wanted but i sorted pressure out. With a MagnetoSpeed chrony i found a stable powder/velocity load. 56.6gr RL26 and then did a seating depth test as 0.010" jump wasnt working for me.
    Name:  shot_1583550923014.jpg
Views: 2057
Size:  391.7 KB

    The 143gr ELD-X liked 0.050" and 0.120" jump.
    I settled with 0.050"jump to keep as much velocity as i could - 2900fps avg ES~20fps. It shots 0.5moa anytime with this load.(tighter usually)

    Name:  shot_1584081306084.jpg
Views: 2077
Size:  201.1 KB
    Last edited by Roarless20; 02-04-2020 at 12:26 PM.
    dogmatix, Tahr, outdoorlad and 7 others like this.

 

 

Similar Threads

  1. Shooting Apps "Range Buddy" and "Reloading Assistant"
    By Dead is better in forum Resource Library
    Replies: 4
    Last Post: 14-01-2017, 05:23 PM
  2. Evolve LED Light Bar For Offroading in sizes 18",20",28",36",43"
    By pighuntingnz in forum Outdoor Transport
    Replies: 4
    Last Post: 27-12-2016, 08:05 AM
  3. "sausage making course" and "curing & smoking course"
    By hotbarrels in forum Game Cooking and Recipes
    Replies: 3
    Last Post: 06-08-2016, 09:11 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!