Printable View
Built it up a while ago using a Tikka as a donor with a Criterion 20" 1-8 barrel. but have been too busy & away to do much with it
Shot some of this through it yesterday along with its 22 & 26" sisters
https://hosting.photobucket.com/imag...720&fit=bounds
It shot pretty well with reasonable velocity
https://hosting.photobucket.com/imag...720&fit=bounds
Will get some more pics up after I shoot it again
Any updates on this one Greg
Sent from my CPH2145 using Tapatalk
@Kiwi Greg very respectable, seems similar to the below video showing factory 175eldx in 20,22,24" barrel.
Seems like the 20" 7prc might be a good option for a short barrel long range rig.
https://youtu.be/eEvJVZDmLcE
Yes but guys need to remember/realise a suppressed short, light rifle shooting 175+ grain projectiles is going to leap up and possibly bite them under recoil, spotting your own shots will be problematicQuote:
Originally Posted by 308mate
Iv foubd my recoil has changed from snappy with the 168 to a push with the 180 spotting shots can certainly be a challange but much better for me with the 180 but im on the verge of to lightQuote:
Originally Posted by Kiwi Greg
This is great to see.
I have a Springfield waypoint 2020 20” carbon in 7PRC on its way and cant wait to start shooting.
I have a small stack on 175gr ELD-X that I’m going to use pretty much just to get the brass from. Then i have some 180gr ELD-M that I’m hoping to load with my H4831sc and see how we get on. Still need to get the dies and the magnum primers (should be easy enough……..ha)
Has anyone been playing around with loads on the the 7PRC yet?
Nice, when is the Springfield due in ?Quote:
Originally Posted by Bowhunta
I have Hornady 7PRC Dies & Ammo in stock
Few people playing mate mainly 2217 2225 and reloader 26 from the reading iv done on here so be sure to publish your findings in the reloading sectionQuote:
Originally Posted by Bowhunta
Dont rule out large rifle primers either if you have some I used them in my 7mm blaser mag to with greater results and the same in my 7LRM wasnt until over 70gns that I started seeing the benefits of the magnum. I use federals
I'm going through the process of loading for my 20" PRC although I'm finding the Hornady brass seems to be a bit erratic with some cases hitting pressure and some not.Quote:
Originally Posted by Bowhunta
I've been using 2217 but are about try RL 26 which I'm sure will be a winner.
Sent from my CPH2145 using Tapatalk
What benefits were you seeing? I have been experimenting with FED210 vs 215 in a couple of my rifles (not just magnums, 7mm08 & 6.5 Creed) with some interesting results.Quote:
Originally Posted by Kelton
Far better sds with 210s up to 70gn then over 70gns the sds were better with 215s . 215s often go well in the 08 case heads .Quote:
Originally Posted by 6.5 CRD
That is the question no one can answer, June/July was the original date, update on Friday was September....but as there's still none in production I'm guessing next year...Quote:
Originally Posted by Kiwi Greg
Sent from my SM-S916B using Tapatalk
Bugger you going a different path now?Quote:
Originally Posted by BRADS
Sent from my CPH2145 using Tapatalk
I have one on order too but definitely tossing up building the ultimate custom with ti action.... its a problemQuote:
Originally Posted by 25/08 IMP