Thread: 20" Tikka 7 PRC

Built it up a while ago using a Tikka as a donor with a Criterion 20" 1-8 barrel. but have been too busy & away to do much with it

Shot some of this through it yesterday along with its 22 & 26" sisters



It shot pretty well with reasonable velocity



Will get some more pics up after I shoot it again

Any updates on this one Greg

Sent from my CPH2145 using Tapatalk

@Kiwi Greg very respectable, seems similar to the below video showing factory 175eldx in 20,22,24" barrel.

Seems like the 20" 7prc might be a good option for a short barrel long range rig.

https://youtu.be/eEvJVZDmLcE

Originally Posted by 308mate

@Kiwi Greg very respectable,

Seems like the 20" 7prc might be a good option for a short barrel long range rig.

Yes but guys need to remember/realise a suppressed short, light rifle shooting 175+ grain projectiles is going to leap up and possibly bite them under recoil, spotting your own shots will be problematic

Originally Posted by Kiwi Greg

Yes but guys need to remember/realise a suppressed short, light rifle shooting 175+ grain projectiles is going to leap up and possibly bite them under recoil, spotting your own shots will be problematic

Iv foubd my recoil has changed from snappy with the 168 to a push with the 180 spotting shots can certainly be a challange but much better for me with the 180 but im on the verge of to light

This is great to see.
I have a Springfield waypoint 2020 20” carbon in 7PRC on its way and cant wait to start shooting.

I have a small stack on 175gr ELD-X that I’m going to use pretty much just to get the brass from. Then i have some 180gr ELD-M that I’m hoping to load with my H4831sc and see how we get on. Still need to get the dies and the magnum primers (should be easy enough……..ha)

Has anyone been playing around with loads on the the 7PRC yet?

Originally Posted by Bowhunta

This is great to see.
I have a Springfield waypoint 2020 20” carbon in 7PRC on its way and cant wait to start shooting.

I have a small stack on 175gr ELD-X that I’m going to use pretty much just to get the brass from. Then i have some 180gr ELD-M that I’m hoping to load with my H4831sc and see how we get on. Still need to get the dies and the magnum primers (should be easy enough……..ha)

Has anyone been playing around with loads on the the 7PRC yet?

Nice, when is the Springfield due in ?

I have Hornady 7PRC Dies & Ammo in stock

Originally Posted by Kiwi Greg

Nice, when is the Springfield due in ?

I have Hornady 7PRC Dies & Ammo in stock

That is the question no one can answer, June/July was the original date, update on Friday was September....but as there's still none in production I'm guessing next year...

Sent from my SM-S916B using Tapatalk

Originally Posted by BRADS

That is the question no one can answer, June/July was the original date, update on Friday was September....but as there's still none in production I'm guessing next year...

Sent from my SM-S916B using Tapatalk

Bugger you going a different path now?

Sent from my CPH2145 using Tapatalk

Originally Posted by 25/08 IMP

Bugger you going a different path now?

Sent from my CPH2145 using Tapatalk

I have one on order too but definitely tossing up building the ultimate custom with ti action.... its a problem

Originally Posted by Bowhunta

This is great to see.
I have a Springfield waypoint 2020 20” carbon in 7PRC on its way and cant wait to start shooting.

I have a small stack on 175gr ELD-X that I’m going to use pretty much just to get the brass from. Then i have some 180gr ELD-M that I’m hoping to load with my H4831sc and see how we get on. Still need to get the dies and the magnum primers (should be easy enough……..ha)

Has anyone been playing around with loads on the the 7PRC yet?

Few people playing mate mainly 2217 2225 and reloader 26 from the reading iv done on here so be sure to publish your findings in the reloading section

Originally Posted by Bowhunta

This is great to see.
I have a Springfield waypoint 2020 20” carbon in 7PRC on its way and cant wait to start shooting.

I have a small stack on 175gr ELD-X that I’m going to use pretty much just to get the brass from. Then i have some 180gr ELD-M that I’m hoping to load with my H4831sc and see how we get on. Still need to get the dies and the magnum primers (should be easy enough……..ha)

Has anyone been playing around with loads on the the 7PRC yet?

I'm going through the process of loading for my 20" PRC although I'm finding the Hornady brass seems to be a bit erratic with some cases hitting pressure and some not.
I've been using 2217 but are about try RL 26 which I'm sure will be a winner.

Sent from my CPH2145 using Tapatalk

Getting good results with 180eldm 66,4gn H4831sc, large rifle primer (fiocchi) and Hornady brass

Originally Posted by tibo

Getting good results with 180eldm 66,4gn H4831sc, large rifle primer (fiocchi) and Hornady brass

Barrel length and speed mate?

Originally Posted by Kelton

Barrel length and speed mate?

24inch, 2930fps

First two group of 3 shot at 300m. Got too excited and pulled those third shot…

Was also going to try Staball HD I won’t bother.