Thread: 26" Edge

They trued etc?

They come ready to roll packages?

Sent from my GT-I9300T using Tapatalk 2

Originally Posted by tui_man2

They trued etc?

They come ready to roll packages?

Sent from my GT-I9300T using Tapatalk 2

Yep all my rifles ready to go, run in, load developed, so the clients don't have to spend time & money trying to get them going.

Then I/they know they shoot, for piece of mind for both parties as some people can't shoot as well as they think & some rifles don't shoot as well as they should no matter who made the barrel or built the rifle.

I have dies & brass available for all of the calibres I sell & can supply powder, projectiles, scopes etc for build clients

They will be trued if the client wants it done, never trued any of my own rifles yet, can't see the point....

Cost depends on specifiction.

It costs the same if it has a Rem action & after market barrel whether it is a .224 or .338 the .224 probably wouldn't have a brake though

It weighs 10.3lbs 4.7 kgs in the pictures Steel NF rings & MK4

Bare it weighs 8.47 lbs, 3.84 kgs

The Edge, as seen in this thread.
Ready to go, barrel run in, load developed, with 50 brass.
McMillan stock, T3 Terminator Brake, light weight firing pin & shoud, fluted bolt & barrel, 1-9 TrueFlite Ultramatch barrel, 2lb trigger, 20 moa alloy rail.
The price will be $4600.
I have dies available, Redding & Hornady, brass, projectiles etc.
I can get scopes etc to go will rifles I build & sell.

The Edge, as seen in this thread.

The price is $4600 Inc gst.

Ready to go, barrel run in, load developed, with 50 RP brass.

McMillan Carbon A3 stock, T3 Terminator Brake, light weight firing pin & shroud, fluted bolt & barrel, 1-9 TrueFlite Ultramatch barrel, lightened trigger, 20 moa HD alloy rail.

I have dies available, Redding & Hornady.

I have plenty of brass available, Remington, Norma, Bertram.

With all my builds I can supply powder, projectiles, scopes, etc

All the machining on all the rifles I sell is done by professional gunsmiths during normal working hours, with their own reputations & businesses at stake.

What's the load you are running for those velocitys?

Originally Posted by 338

What's the load you are running for those velocitys?

A little less than a couple of my clients choose to run them at

2800-30 is generally where they end up.