Match 7-6.5 PRC Rifle

Just got around to getting this going this weekend, its only had 40 rounds through it & it looks like it ready to go

https://hosting.photobucket.com/imag...720&fit=bounds

It has a 30" Bartlein 1-8 HV barrel, Barnard Model P action, XLR Chassis with a custom extended forend

https://hosting.photobucket.com/imag...720&fit=bounds

Tried a couple of ADI powders with the 180 ELDM, its only cruising because there is a maximum velocity restriction

https://hosting.photobucket.com/imag...720&fit=bounds

Funny how when you are shooting 7 or 8 rifles at a time it takes a bit of getting used to some of them....

https://hosting.photobucket.com/imag...720&fit=bounds

Might try another ADI powder, just because, going to be difficult to improve it though

https://hosting.photobucket.com/imag...720&fit=bounds

Will test it further out along with my heavy hunting one

Do you neck turn the brass? Is it saami approved of just a popular wild cat adopted by many but not gone through the process yet like the 6.5-284 used to be 30 years ago?

Quote:

---

Originally Posted by Friwi

Do you neck turn the brass? Is it saami approved of just a popular wild cat adopted by many but not gone through the process yet like the 6.5-284 used to be 30 years ago?

---

Not Saami, just getting big in the F Class world, I neck turn because I can & it is, I feel one of the few things (if done well) that actually can make a difference, even with good brass...

Here is a 20" one I did first to compare to a 7 PRC sister rifle

https://www.nzhuntingandshooting.co....6-5prc-104778/