I thought I would start a thread to put some unsolicited testimonials in
I thought I would start a thread to put some unsolicited testimonials in
Contact me for reloading components, brass, projectiles, powder, primers, etc
http://terminatorproducts.co.nz/
http://www.youtube.com/user/Terminat...?feature=guide
25/05/2012
Hi Greg,
I now have your brake on the edge, the difference is a at least half the recoil of the ssr brake and hre can,
I would have no trouble recommending them to anyone.
Now if you could just make them quiet.....haha
Thanks Duncan.
Contact me for reloading components, brass, projectiles, powder, primers, etc
http://terminatorproducts.co.nz/
http://www.youtube.com/user/Terminat...?feature=guide
22/03/2012
I have put one of Greg's T3 Brakes on my new Sendaro 300 - works amazingly well.
1st shot i went bloody hell and the two people behind me went bloody hell - no recoil and LOUD
1st muzzle brake that i have had - very impressed - able to see bullet strike on a wallaby on the weekend at 347 metres with 190 bergers.
Contact me for reloading components, brass, projectiles, powder, primers, etc
http://terminatorproducts.co.nz/
http://www.youtube.com/user/Terminat...?feature=guide
24-06-12
Got my rifle back from gunworks the other day and shot it Sat morning and today.Still wondering where the recoil has gone
I'm wishing I'd kept my Titanium saum now,even with a vias brake it was still a pig of a thing to shoot!
Had a steel shoot today,only had 20 rounds for the 7mm mag as I only sighted it in and found a load with the Amax yesterday but still managed first round its at 730yrds 775yrds and 1000yrds and the T2 had a good hand in that I reckon plus I covered anyone next to me in snow haha and everyone else knew when I had fired
Contact me for reloading components, brass, projectiles, powder, primers, etc
http://terminatorproducts.co.nz/
http://www.youtube.com/user/Terminat...?feature=guide
24-06-12
Just shot the t3 on my 338 TRG with the terminator T3 and noticed a significant improvement over the factory sako brake so am very impressed thanks kiwi greg!
I will forwarding this brake on to a couple of TRG lads to try as well so watch this space!
Contact me for reloading components, brass, projectiles, powder, primers, etc
http://terminatorproducts.co.nz/
http://www.youtube.com/user/Terminat...?feature=guide
27-05-12
I had a go with gregs 7mm mag down the range yesterday with his 7mm brakes which I think he is in the final stages of perfecting and it certainly made the sps rem mag a walk in the park when we screwed the brake on. One of these will certainly be on my shopping list shortly for my 7 pound all up 280 AI.
My shoulder highly recommends them
Contact me for reloading components, brass, projectiles, powder, primers, etc
http://terminatorproducts.co.nz/
http://www.youtube.com/user/Terminat...?feature=guide
Had a T2 fitted to my 7mmRM TikkaT3 a couple of weeks ago by Scott Trail of SSRNZ. Test fired it on Sunday and have to say I'm very impressed. Certainly knocked the recoil down to where I will be able to observe hits myself. An unscientific estimation puts the felt recoil at about the level of my 243 shooting 100 grain projectiles at 2900 fps. This is from my 7mmRM launching 162 grain SST's at 2970fps. The muzzle blast is as you would expect significantly increased, but ear plugs prevented any ringing of the ears. I would have no hesitation recommending both the Terminator T2 brake and Scott of SSRNZ. Scott turned the two 7mmRM's around in six days as promised. Am seriously considering having Scott fit a T2 to my Winchester Coyotee in 308 to improve the post shot sight picture.
PS - have now ditched the Limsaver pad on the Tikka for the original Tikka factory slab of rubber (less bounce of the shoulder) and the rifle still sits on target after the shot.
Hi Greg re T2
Wow thats the first I'v been able to see hits on the plate at 740 yards,no worries at 1020.
Couldnt really tell the diference from 250's and 300's makes the DE ones look shit.
Sick as bro Ha Ha Thanks Greg .
Cheers Chris
Contact me for reloading components, brass, projectiles, powder, primers, etc
http://terminatorproducts.co.nz/
http://www.youtube.com/user/Terminat...?feature=guide
Contact me for reloading components, brass, projectiles, powder, primers, etc
http://terminatorproducts.co.nz/
http://www.youtube.com/user/Terminat...?feature=guide
Hi Greg. Just thought I'd let you know how the brake went on the 7 Mag Holy crap. I was hugely impressed! Like shooting a 243 maybe. My dad who is
78 had a blast and he was impressed also. Certainly tamed her down.
I'll give anyone I know who is thinking "muzzle brake" a nudge in your direction.
I'm well happy, cheers
Adrian
Contact me for reloading components, brass, projectiles, powder, primers, etc
http://terminatorproducts.co.nz/
http://www.youtube.com/user/Terminat...?feature=guide
Hi Greg,
I purchased a T3 from you a few months ago to fit my tikka 300wm. Just letting you know I am very pleased with the performance of the brake. It really is fantastic, the gunsmith who fitted it says it's the most of effective brake he's ever seen! Thank you very much!
Many Thanks,
Chris
Contact me for reloading components, brass, projectiles, powder, primers, etc
http://terminatorproducts.co.nz/
http://www.youtube.com/user/Terminat...?feature=guide
Hey Greg,
Just thought I'd let you know I got that T2 muzzle break fitted (to my Sako 300 Win mag ) and took it to the range the other night and wow! It is bloody amazing! It's like shooting a water pistol there's so little recoil!
Cheers
Brad
Contact me for reloading components, brass, projectiles, powder, primers, etc
http://terminatorproducts.co.nz/
http://www.youtube.com/user/Terminat...?feature=guide
Hey Greg
Had my first shooting last week. Your brake rellay rocks! It’s so efficient. Now a .338 fells like .308 in recoil.
Thanks again for the easy transaction!
Best regards
Stefan
Contact me for reloading components, brass, projectiles, powder, primers, etc
http://terminatorproducts.co.nz/
http://www.youtube.com/user/Terminat...?feature=guide
Contact me for reloading components, brass, projectiles, powder, primers, etc
http://terminatorproducts.co.nz/
http://www.youtube.com/user/Terminat...?feature=guide
Bookmarks