Thread: Stock Packs!!!!!

@twinneedle.

Got a chance to give it a thrash through the Ureweras this weekend, went great and sat solid as a rock in position.
Didn't snag on too much, even in some shitty stuff.

Only things that need changing other than what you have mentioned is definitely the zip which you said you will swap around but most definitely which is a must have for most of us wanting these is it needs to be a sleeve or something similar where the foam sits for swapping out or adding additional foam for adjusting comb height.

Other than that it's a primo product that you guys have made. Tempting to get a few more.....

Is there enough room there to hold long magnum rounds?

Originally Posted by Nibblet

@twinneedle.

Got a chance to give it a thrash through the Ureweras this weekend, went great and sat solid as a rock in position.
Didn't snag on too much, even in some shitty stuff.

Only things that need changing other than what you have mentioned is definitely the zip which you said you will swap around but most definitely which is a must have for most of us wanting these is it needs to be a sleeve or something similar where the foam sits for swapping out or adding additional foam for adjusting comb height.

Other than that it's a primo product that you guys have made. Tempting to get a few more.....

To adjust comb height of the Triad packs you use double sided velcro to "stack" under the pack.

See here Rifle Fit: Cheekweld- Part 2 | Art of the Rifle

Personally I prefer the zip the way it is. Easy to access in the prone position without removing the rifle from your shoulder so would be good to have the option when ordering.

Id prefer the zip closing to the front as well.

Talking with twinneedle they have a similar way for comb adjustment in mind.
As for zip I'll put on my file what people want, I found in the tighter stuff with the zip forward and the lanyard tucked inside it still opened slightly. Only twice though.

Just hook me up bro! Whichever way you think, I can't bloody wait


Sent from my iPhone using Tapatalk

Originally Posted by Nibblet

Talking with twinneedle they have a similar way for comb adjustment in mind.
As for zip I'll put on my file what people want, I found in the tighter stuff with the zip forward and the lanyard tucked inside it still opened slightly. Only twice though.

Sweet, comb height more important for me than pocket.
Need to be able to secure closed cell foam as discussed in a sleeve or similar.

B

Be good to get this mentioned on some overseas forums so they can export a few, especially with the way the dollar is.

Originally Posted by shift14

Sweet, comb height more important for me than pocket.
Need to be able to secure closed cell foam as discussed in a sleeve or similar.

B

Talking with Matt it will be something similar to the triad one's. Sleeve won't work well due to the nature of the material

@1toeknee1 - 1, coyote brown
@Alonzo - 3, multicam, kryptek, coyote brown
@shift14 - 1, coyote brown
@nzfubz - 1, coyote brown
@Gerbs - 1, black
@Bryan -1, multicam
@von tempsky fan - 2 any form of camo
@Moutere - 1, multicam
@Scouser - 1, black
@sneeze - 1, black
@Danny - 1, most common colour
@camo wsm -1 maybe 2 TBC, definitely 1 in pencott
@Happy - 1, black
@Gillie - 1, OD green maybe with no pocket
@southernredneck - 1, coyote brown left hand
@kiwijames - 1, no colour choice supplied
@longrange308 - 1, camo of some sort
@6mm ackley - 1, no colour choice supplied
@POME - 1, black no pocket
@ariki - 1, no colour choice supplied
@NZShoota - 1, no colour choice supplied
@peteroks
@Sylvester

I'm going to assume that everyone other than those that have said otherwise and those that PM me in the next few days that your preference is for the zip to close towards the rear, if you want it to close towards the front please let me know ASAP and @twinneedle will go into production during the week.

@Gillie and whoever else wanted no pocket, Matt has told me it's a pain in the ass to have multiple things going on at once but if you are hell bent on not having a pocket and just a velcro patch on the outside these will be considered custom jobs and looking at around $85 give or take.

As it is he is trying to get them out the door for as close to $65 each.

Where comb adjustment is concerned it will be similar to the Triad ones with velcro strips to build up to the desired height.

@Gibo..... you know you want one

The sooner I get everyones preferred zip direction the sooner you will have em.

Oh and don't pay too much attention to the list, I just need to tag all the names again, I have everyones updated orders on my spreedsheet

Cheers for helping Kiwi!

I'm happy with the zip closing at the rear


Sent from my iPhone using Tapatalk

@Nibblet . May I have two now please. Sorry one for a mate both black

Originally Posted by Nibblet

Oh and don't pay too much attention to the list, I just need to tag all the names again, I have everyones updated orders on my spreedsheet

Originally Posted by Happy

@Nibblet . May I have two now please. Sorry one for a mate both black

Should have put it in bold haha

I have you down for 2, black and kyrptek both R/H

To clear some confusion, or maybe add some

Forward closing zip for me please.