Printable View
Hey all
I just bought a winchester ultimate shadow s/s in .243 and i'm planning on getting it shortned it as much as possible and putting a can on it.
I have a couple of questions. How short can I get it cut down without making a meal of the rifle.
Am I better off getting an overbarrel type or front mount suppressor.
It will be a bush stalking rifle so as long as it shoots accurately out to 200m max ill be happy. Most deer I encounter in the bush are less than 50m.
Cheers
Strider
Cut at 18" fit an over barrel and you d be back roughly at the current length
I have mine at 16 and over barrel dpt makes for 20in barrel nicely balanced
I have a rem 700, cut at 18". Running 55gr Nosler BTs.
Have shot wallabies out to 400m and rabbits at 350m.
Running a GW suppressor.
Attachment 51988
i can say having taken a 243 from 20 down to aprox 18" the muzzle blast and flash at dusk is significant & your hunting buddies will not appreciate it. You need the suppressor.
As its a bush rifle I would be going for the over barrel. 1, its shorter and 2, it will be stronger having 2 points of contact on the barrel for that day you knock it against something. The shortest over barrel suppressors add aprox 80mm.
ZQ
issue you MIGHT strike with .243 going back to minimum length is you going to struggle to get velocity high enough to keep the knock down energy....... Ive got short bush rifle and yip its neat to carry in tight stuff but Ive just spent four days lugging around another rifle with decent longer barrel and didnt really notice it as a big handicap....one bonus of longer barrel is its a bit safer in those tricky spots when you end up using it as walking stick as the muzzle usually points a bit further away....
one day someone is going to make a lot of money sticking longer barrels back onto rifles that got cut back too short.....
Got a 75 Finnlight. Had it threaded at its std length 20in by Dan Hardy .Got a Dan Can on it probably a Gen 3 . When I got it back swore like crazy that he had not threaded it. Man he did an invisible cap over the thread.Really impressed still after all these years. 2 shots over Easter 2 dead deer all at 300 to 320m. Swings beautifully. Mate bought an X Bolt 223 and had a Dan Can put on it but no chopping[reliant on advice from the store he bought it over Whakatane way] He kills a lot of deer with it but is unhappy now with the balance having tried out our T3's 223 with Tok Can and chopped at 19in by Darren.We use 7 baffles including a stainless at the muzzle. Swore when he cut it at 19 after wanting it at 20in but the balance is superb.Different strokes for different folks.
Had mine cut back to 18" with a A-Tec overbarrel on it, works a treat...
That is a cracker foto.:thumbsup:Quote:
Originally Posted by scottrods
I load for my dads Model 7 243 with a factory 18.5" unsuppressed barrel. The lads are right when they say you will need a supressor at that length, she's a mean little hua! Loud as all hell and a mean muzzle flash.
I wanted him to be able to shoot Reds out to about 350 yards with it, so have loaded 100 gr sierra Gamekings, with 7828ssc ive got them going just shy of 2900, whereas the factory 100gr stuff is only doing 2600 fps from the 18.5" tube. Thats not a concern at all if 200 yards is your intended max range.
Old family acquaintance years did some shooting with a little rem 788 243 with the factory short barrel. It was a tack driver but this story involved him shooting over the roof of his car as a rest. Bloody thing left funny scorch marks on the paint. Still under warranty and something happened with that but not sure.
If it left blast patterns it would've been loud
