Thread: 6x45 Rem barrel

I got the action all trued up, barrel threaded both ends and chambered.
I polished a few rough edges on the bolt/bolt channel and burnished in some molly powder which made it very slick.





The new barrel was a slightly bigger profile so the stock needed a little more inleting and will get a touch up with some stain and oil.



Finally reassembled it and threw a scope on to test on some paper tomorrow. The rings are too high but will do for testing purposes.



I put a few of my 75gr HP loads for my CZ through it over the chrono and they were a bit hot for the faster twist so will drop a grain and load some to mag length for the tests.