Thread: 7mm08 reamer

Any good bugger on here have a 7-08 reamer I could borrow or rent ? Scored a 284 Shillen barrel off tardme a while back and had a look down the spout with a borescope this week, looks like a decent option for long-range gongs, then I can chop the original barrel down to bushpig length.

Ta, ebf

You are going to ream the 284 barrel to 7/08? I dont think that will work unless there is a heap of knox left?

Originally Posted by veitnamcam

You are going to ream the 284 barrel to 7/08? I dont think that will work unless there is a heap of knox left?

If i am reading the first post correctly I think EBF has a new shillen barrel with a 284 hole thru it rather than an actual .284 chambered barrel. But I could be wrong I have been before

Originally Posted by mikee

If i am reading the first post correctly I think EBF has a new shillen barrel with a 284 hole thru it rather than an actual .284 chambered barrel. But I could be wrong I have been before

Ah silly me... I assumed trade me and bore scope must be secondhand.

Originally Posted by veitnamcam

Ah silly me... I assumed trade me and bore scope must be secondhand.

And you could yet be correct?? @ebfwho's right??

Originally Posted by mikee

And you could yet be correct?? @ebfwho's right??

Say what your thinking mikee

Saum it!


Sent from my iPhone using Tapatalk

Originally Posted by ebf

Any good bugger on here have a 7-08 reamer I could borrow or rent ? Scored a 284 Shillen barrel off tardme a while back and had a look down the spout with a borescope this week, looks like a decent option for long-range gongs, then I can chop the original barrel down to bushpig length.

Ta, ebf

You gunna hunt gongs in the bush??

Sent from my E5823 using Tapatalk

.284 caliber barrel, enough Knox left, will cut off the existing tang and thread outside for savage action.

Was a 7mm RM previously, but after looking down it with a borescope it seems to have done very little work.

Originally Posted by ebf

.284 caliber barrel, enough Knox left, will cut off the existing tang and thread outside for savage action.

Was a 7mm RM previously, but after looking down it with a borescope it seems to have done very little work.

see.............. I was wrong

Originally Posted by ebf

.284 caliber barrel, enough Knox left, will cut off the existing tang and thread outside for savage action.

Was a 7mm RM previously, but after looking down it with a borescope it seems to have done very little work.

@ebf
You getting our mate in Norfolk Road to do this? Or Scott?
Cheers - looks interesting mate

If I can find a reamer that is the plan.

How is your FTR project going ? You shooting Wairarapa on Monday ? I'm heading up for Gisborne champs and will do Wairarapa on the way back.