Thread: 9mm and rimfire bolt action

Grip and stock should be fine under the new law on a non prohibited firearm.

Originally Posted by ChrisF

Its a bolt action , the mag is fine , whats maybe not is the AR15 pistol grip & stock ,

Originally Posted by Sasquatch

Grip and stock should be fine under the new law on a non prohibited firearm.

Pistol grip and stock are easy to sort if you are making them. Just make them so they do not fit AR stuff and you are fine. IE will only fit this rifle and no others. (perhaps narrow down the fitting oints so AR stuff needs a spacer to fit, but you grip would be too narrow to fir AR and it would no longer be restricted due to not fitting restricted firearms therefore could not be a restricted part)

Magazine is only allowed to hold 10 rounds or less. You would have to check to see if the law means must not be capable of holding a magazine of more than 10 or if it means you can only have up to 10 round mags in your possession. Not sure I would ask AO yet as they are like us and still working out these things. Could be worth a chat to a lawyer like Nicholas Taylor......Especially if you are going to make these.

Again, you could modify the mag so that your 10 round mag fits but larger std ones dont. Take a notch out of the top of the mag (at the back perhaps and fit a matching bump to the inside of the mag well and only that mag will fit and a normal pistol mag will not.....Or go cheap arse on it and make it single shot or internal mag as suggested above.

Looks awesome.