I'd like to make or buy an adjustable butt stock, needs to be 2 position (to suit my son and I)...So far Im not having much luck finding anything...any ideas pls?
This is all Ive found so far..
SKP Buttplate
I'd like to make or buy an adjustable butt stock, needs to be 2 position (to suit my son and I)...So far Im not having much luck finding anything...any ideas pls?
This is all Ive found so far..
SKP Buttplate
Wouldn't you want something with indexing, so that it is simple to change the settings consistently from one person to another ?
Viva la Howa ! R.I.P. Toby | Black rifles matter... | #illegitimate_ute
I think Reloaders has something along the lines of what your looking for. Saw it in the shop a while ago.
The Biggest Room is the Room for Improvement
How about one of those slip on gumboot recoil pads..maybe a bit crude, but cheap and will do the job, would add an inch or 2.
yes if possible...not having much joy in finding anything so far.
those slip on ones would be the go. dad has an adjustable mcmillian target style stock on his 243 that would work but I hate to think what it would cost to get one, 1200+ if baught locally nodoubt....
with a bit of kiwi Ingenuity you could make one up easy enough, they are just a sliding pole that fits to the recoil pad that a bolt tightens up against once the stock is the desired length
they do catch on sticks and leaves when in the thick stuff tho
Im target shooting so not an issue with twigs. Yeah if I had a metal working lathe / setup it would be a easy peasy. Meanwhile Im playing with some ideas on paper to see if I can do it by buying some bits and using woodworking tools...ie my drill press.
yea totaly possible with just normal tools
think broom stick thickness tube attached to the but pad that slides in and out of the stock. locked by a bolt that just tightens against it
if there was only two shooters using it id set it up to completly remove and have a set amount of spacers that just slid onto the tube to give the correct distance quickly.
we were going to do this to dads gun but have never got around to doing it. for spacers we were just going to use a block of wood or similar
http://i161.photobucket.com/albums/t...100_1334-1.jpg
this is the stock he has, omit the adjustable cheek piece and slidey up and down recoil pad any you have what I mean
Bolt action : Neilsen MN300
What I'd like to do is add something like your butt piece to it...
is it the lenght of pull you want to adjust or the height of the cheek piece?
length of pull, cheek piece is already covered. The Butt of the stock has been hacked with a saw so I need to rebuild/repair it anyway ie cut new pieces in, or I could cut all that off cleanly and fit an adjustable butt.
This looks ideal but they wont ship out of the US,
Tubb Buttplate Assembly | Sinclair Intl
An afternoon with a lathe, milling machine and some alloy as you say and I'd be sweet....not hard to make
regards
that is exactly what the mcmillan of dads has,
if you could make one, you would probably have a few orders comeing your way
Ive found the actual maker so Ive sent them a msg asking if they'll ship to NZ. The 4 way is listed at $116USD + shipping. If they do even at $200NZ its a deal.
ie they say "International orders must be placed over the phone." so it might well be possible.
David Tubb - Superior Shooting Systems - Tubb 2000 - Final Finish
Not sure what happens with importing here but I can cross that bridge with my AO if they will ship. If they will I'll try and import a few depending on the interest.
Bookmarks