Thread: Another 9mm Shotgun

Was away over the weekend so spent way too much time reading through old forum threads on the tablet,
I saw Toby's thread on a 9mm shotgun so thought I'd post mine up.

Has a 9mm pistol barrel inside a machined sleeve locktited into the 12ga barrel, with a chamber cut at the rear, generally sits behind the seat in the ute in case I see goats on the roadside.

May get a smaller red-dot for it and spray bomb it camo, still plenty of room for shortening in future

Permanent fitting of adapter is the go I recon.
How's it shoot?

Sent from my GT-S5360T using Tapatalk 2

Hell yes!

Originally Posted by veitnamcam

How's it shoot?

Like a banana, tried some major power factor rounds a few weeks ago and they were much better, tempted to ream the chamber to 9x21 or better...
Permanent fitting is good cos you can shake the gun and the case falls out, the original plan was to cut a slot in the insert and narrow and extend a shotgun ejector to pull the shell out, but we made it years ago at my mates dad's workshop and didn't know if it was safe

I was thinking a full length barreand the same as you re: modifying the extractor

But talked myself into the idea of if im going to spend money on a barrel and getting the extractor modded and stuff I might as well save up for a 9mm that takes a mag. I'd love a marlin camp nine

Originally Posted by Toby

if im going to spend money on a barrel and getting the extractor modded and stuff I might as well save up for a 9mm that takes a mag.

Yeah the exact reason I haven't gone overboard with it, could just buy a izh-18mh single shot in the desired calibre for cheap. Only thing this project cost was $40 for the shotgun and $5 for the rail