Thread: Another Fully Suppressed 22

Hi Gents,

I just had this tidy JW-15 come along for the right price so thought I would cut it down and suppress it, I have done a few.

The barrel was cut down to over min length, fitted with a full length tube and K baffles installed in the front. They make for a really quiet handy little pest control tool.

I will most likely pass this on if there is any interest or put on TM, anyway up for just to show you guys something different.

Cheers

Pretty cool.
What happened to the baffles?

I think he has milled/drilled that off centre dent to induce gas swirl between the baffles...to slow their release.

Yep just standard K baffles, that's how they work

Have you had the opportunity to test its accuracy yet???

That looks rather tidy! Nice job.

I guess the exception proves the rule- the JW I chopped down for my nephew had a straightest/ most concentric bore my gunsmith (at the time) had ever seen.

Originally Posted by XR500

Have you had the opportunity to test its accuracy yet???

I have not tested this one but have made a few, mostly good for an inch at 50 so minute of rabbit.

Originally Posted by muzza

Did your barrel have the typical wildly off-centre bore that most JW15s have ?

Yep sure did but I machined the internals of the suppressor concentric to the bore

Originally Posted by XR500

I think he has milled/drilled that off centre dent to induce gas swirl between the baffles...to slow their release.

Ah, I zoomed in and it no longer looks like a 'field mod'
And I have learnt something too. Cheers guys.