Printable View
I noticed a comment on a thread in the buy/sell section about rechambering a Baikal take down 7.62x39 into 303 or 7.62x54R. If you have gone down that road could you tell me about the pros and cons of the process and how successful the end result was please?
The one in 303 I saw, I am pretty sure was done by gunworks. The tapered case from the 303 works well in this style of action. Not sure about accuracy with the rifling twist, but I suspect as long as the muzzle velocity remains similar they should be reasonable. Factory 303 and x39 are similar velocities with the 303 having the heavier projectile ...Quote:
Originally Posted by rupert
I would add, that whie I have seen one, I did not get the chance to try it out....
Like all things, just because something can be done, does not mean its a good idea...
Thanks for the info. Very helpful.
Tim-your thought od reloading some .303 loads with 123/125 gn 7.62x39 slugs or would these be better in a subsonic loadQuote:
Originally Posted by timattalon
The twist rate is 1:10 from memory so a .303 will be fine if I've not gone senile.
A few guys have used the .311 projectiles of 123grns in the 303brit. Results vary but consensus seems to be no worse than a lot of other options.when they work they are fine. The wee x39 round is perfectly adequate out to 150 all day long.some will argue much further.