Bell and Carson rescue

Some of you may recall I put feelers out for a more rigid stock for my model 70 a few weeks ago bonus points if it was a monte carlo style.
Well after not much luck along comes me old mate @Ryan_Songhurst who sent me a message alluding to a Bell and Carson stock he had left over from a previous rifle.
Said stock was glass with internal aluminum skeleton and bedding block and bonus it was a monte carlo style stock.
It just needed a slight cosmetic repair........
"Slight"

Attachment 149920

Ryan was upfront and fessed up to getting impatient whilst sanding it back and decided to speed up the process by using a flappy disc on an angle grinder......well it didn't end well but he agreed to send the stock to me for nix if I was happy to get it repaired.
What a gc but hey that's how we roll and we help each other out :thumbsup:
Anyway I assessed the stock when it arrived and deemed it beyond my agricultural artisan skills, this was for a gentleman's rifle not a hack after all :D
I contacted a local who specializes in plastic welding and fiberglass repairs and he agreed to take on the job and was very confident he could fix it.
3 days later I get a message from the repairer "all done, would you like me to spray it and finish it off with a rubberized coating for better grip ?" Of course I accepted his offer and was able to pick up my stock that evening.
I think he's done a bloody great job and I'm very pleased with the results and my new rigid monte carlo stock.
Big ups to you Rysn for helping a fellow gentleman out and as always you if there's ever anything I can help ya with just sing out.

Attachment 149921

Attachment 149922

Attachment 149923

In my defence:

A. I didn't "accidentally" make that gaping big hole in it, just once I had damaged it I thought oh well its rooted now, I'll open it right up to be nosey and see how it's constructed

B. I am a dairy farmer, the great durability testers of all things

Stock looks great mate, I'm sure some work could go that fellas way if he can turn out jobs like that.

....if you’d rounded the sharp edges off, little bit of big and paint, you’d have something that’d be ....
Different, funky, light....


Yeah, ok, I’m only a truck driver with rural roots. Maybe abit ruff around the edges as well.
Looks good Danny

Plus the mighty 270 deserves the best.

Quote:

---

Originally Posted by Ryan_Songhurst

In my defence:

A. I didn't "accidentally" make that gaping big hole in it, just once I had damaged it I thought oh well its rooted now, I'll open it right up to be nosey and see how it's constructed

B. I am a dairy farmer, the great durability testers of all things

Stock looks great mate, I'm sure some work could go that fellas way if he can turn out jobs like that.

---

Unintended omission bud :thumbsup: I fugured it was pretty obvious no one sands that aggressively even with a flappy disc on a grinder :D

Cheers for the stock mate I'm really pleased with how it's come up. I owe you.....again :oh noes:

That came up well. You know it's not a Monte Carlo though right?

Quote:

---

Originally Posted by PaulNZ

That came up well. You know it's not a Monte Carlo though right?

---

Oh ? The raised cheek rest is what I have always referred to as "monte carlo" please enlighten me ?

Quote:

---

Originally Posted by Ryan_Songhurst

In my defence:

A. I didn't "accidentally" make that gaping big hole in it, just once I had damaged it I thought oh well its rooted now, I'll open it right up to be nosey and see how it's constructed

B. I am a dairy farmer, the great durability testers of all things

Stock looks great mate, I'm sure some work could go that fellas way if he can turn out jobs like that.

---

Just as well you did. Save's everyone else with one the trouble. Their made a lot more solid than I thought.

Monte Carlo refers to a raised comb where there's a pronounced step down to the butt when viewed from the side. Yours would be a straight or classic style stock with cheekpiece, not a Monte Carlo with cheekpiece. Personally I prefer a straight stock like yours over a true Monte Carlo, as long as the comb is high enough.

Not that the exact name makes a blind bit of difference to how it looks or works of course! :)

Quote:

---

Originally Posted by PaulNZ

Monte Carlo refers to a raised comb where there's a pronounced step down to the butt when viewed from the side. Yours would be a straight or classic style stock with cheekpiece, not a Monte Carlo with cheekpiece. Personally I prefer a straight stock like yours over a true Monte Carlo, as long as the comb is high enough.

Not that the exact name makes a blind bit of difference to how it looks or works of course! :)

---

Cheers always learning, it was the shape I wanted either way so I'm happy with what I got. The factory stock was straight with no raised cheek piece at all and didn't feel right to me, the b & c also has a much thicker palm swell which suites my Sasquatch like hands.

Quote:

---

Originally Posted by Ryan_Songhurst

In my defence:

A. I didn't "accidentally" make that gaping big hole in it, just once I had damaged it I thought oh well its rooted now, I'll open it right up to be nosey and see how it's constructed

B. I am a dairy farmer, the great durability testers of all things

Stock looks great mate, I'm sure some work could go that fellas way if he can turn out jobs like that.

---

Your cows got any tits left:)

That stock has come up a treat, I think anyone would be happy with that job.

Quote:

---

Originally Posted by Mooseman

That stock has come up a treat, I think anyone would be happy with that job.

---

+1

Some nice workmanship there. I like that rubberized touch idea. Well done that man.

Nicely done.

What does that rubberised coating feel like & how durable is it?

Quote:

---

Originally Posted by Seventenths

Nicely done.

What does that rubberised coating feel like & how durable is it?

---

Feels nice and grippy without being too course, it's used in industrial applications for floors and steps so should be pretty hard wearing

Quote:

---

Originally Posted by dannyb

Feels nice and grippy without being too course, it's used in industrial applications for floors and steps so should be pretty hard wearing

---

Can you PM me who and how much this might cost as I have a Kimber I might consider applying this to.

Quote:

---

Originally Posted by Seventenths

Can you PM me who and how much this might cost as I have a Kimber I might consider applying this to.

---

No secret mate, his name is James, he runs North Canterbury plastic welding and fiberglass repairs.
His number is 0211805103.
My stock repair was $200 including spraying the stock and the ruberized coating.
However he did send me a pic of the product, I'm sure you could apply it yourself.

Attachment 150073

Quote:

---

Originally Posted by dannyb

Attachment 150073

---

Is it a clear product or black?
How do you think it will wear and age?
Iv been looking for something like this for my kimber stocks for more grip

Fuk looks more like it went under the mower

If you had your wits about you the stock could have had a little side door fitted over the hollow for keeping a spare sandwich

Quote:

---

Originally Posted by Bill999

Is it a clear product or black?
How do you think it will wear and age?
Iv been looking for something like this for my kimber stocks for more grip

---

it's black, i't seems to be fairly hard wearing....if it starts to wear it's easy enough to touch up.

Quote:

---

Originally Posted by northdude

Fuk looks more like it went under the mower

---

I' Don't think @Ryan_Songhurst knows how to use a lawn mower :D

Quote:

---

Originally Posted by 7mmwsm

I had a angle grinder get out of control and chop a chunk out of my leg, not that big though. I had that same "well that's a bit rooted" thought too.

---

I can give you the number of the guy who fixed my stock :thumbsup:

Quote:

---

Originally Posted by dannyb

I' Don't think @Ryan_Songhurst knows how to use a lawn mower :D

---

What do you need a lawn mower for when you have Cows and an mobile electric fence unit....

Very nice looking rifle. big ups to Ryan, big ups to James, and well done for having the vision.

Quote:

---

Originally Posted by Moa Hunter

If you had your wits about you the stock could have had a little side door fitted over the hollow for keeping a spare sandwich

---

Or a field cleaning kit. The repair work looks very well done though.