Printable View
Bit of an update. The bipod is going well. It grips much better than the Harris and I find that because I can load good weight down onto it with the way the legs sit under it it is more consistent off different surfaces. Shot one of those groups tonight where you just watch the hole grow.slightly each time you fire
I have 2x Vektor Maskin Universal bipod mounts that do this sort of thing, as seen in Norway's cool+good youtube videos. Nicely made, has an offset so your barrel doesn't interfere with the bipod
For sale here:
http://www.nzhuntingandshooting.co.n...are-room-4166/
Mounted on rifle to the right here:
http://i58.photobucket.com/albums/g2...60670E49B0.jpg
Does it fit any bipod or you need a particular one
Sent from my GT-I9300 using Tapatalk 2
Any of the versapod/parker hale/AI/DealExtreme bipods that are based on the bren gun bipod
You do have to drill a hole in your stock to install it but that's not really a big deal.
Well the imitation versapod finally gave up and broke as seen here
http://www.nzhuntingandshooting.co.n...913/#post69286
the genuine one is much better but is noticeably heavier
What about mounting a bipod in such a way as that the legs are on the fore stock and when not folded down are in line with the stock,mounted in line with the sling swivel stud?the legs being mounted on either side of the stock?get my drift lol?
SOMEWHERE (and I cant find it again) I have seen a harris adaptor that prob fixes these issues to an extent.
I was looking for a fix also a while ago, but dont like Atlas/PH etc style bipods as find them 'floppy'
To put it crudely, its a plate adaptor and mounts to the sling stud. At the back of the plate is a sling mount - so the fwd pickup for the sling is only 1/2" further back than orginally and close to the stock.
The harris mounts on another stud that is forward further.
Clearance for your podlocks etc to stop digging into you and almost factory mounting position for the swivel.
Ive been meaning to make one for a while as cant find who was selling them (or if they still are) but as usual its just another 'thing' on the list of a million others
Like this?
http://img.tapatalk.com/d/12/12/29/ygunarag.jpg
Mayb not this is a quick detach system
Sent from my GT-I9300 using Tapatalk 2
like a steyr?Quote:
Originally Posted by Rock river arms hunter
Sort of, but without the quick detach, and thus the bipod closer to the stock,but a bit further forwardQuote:
Originally Posted by CreepingDeath
My LR rig is very barrel heavy--food for the bench--but as the rifle weighs 21# I never carry the bench on a hunt... However, shooting prone that muzzle weight is disastrousAttachment 5670 to any accuracy I may have achieved. So I experimented and the pic shows the final result. It places the weight between the butt and forend and is steady as a rock. The Atlas is affixed via a Badger/Atlas rail; the rail affixed to the stock by two through bolts. Whereupon I removed the rail--leaving the original epoxied in nylocs--and mounted the aluminum 1/4x1 1/4 flat stock using existing stock holes/nuts. Drilled the required holes in the aluminum--enough so adjustment is easily accomplished--and alas...
I should mention the sling used (not sure I have a pic of sling on rifle; we'll see). It's a both-shoulder QD (using cups) job and in using the present extended forend it provides some most comfortable flex when carrying. The both-shoulder makes carrying this beast possible in the environment utilized hunting.
yes similar to that,like a sako bipod for their 22/44 trg seriesQuote:
Originally Posted by horihunter
