Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator Ammo Direct


User Tag List

+ Reply to Thread
Results 1 to 15 of 81
Like Tree226Likes

Thread: BSA 243

Hybrid View

  1. #1
    Member ANTSMAN's Avatar
    Join Date
    Dec 2011
    Location
    Wellington
    Posts
    2,697
    Quote Originally Posted by ANTSMAN View Post
    Ah yep makes sense!
    trigger needs some attention- a good clean up at the least- breaks at maybe 4lb
    anyone with any links to how to disassemble trigger and adjust be appreciated.

  2. #2
    Banned
    Join Date
    Mar 2015
    Location
    North Canterbury
    Posts
    5,462
    Quote Originally Posted by ANTSMAN View Post
    anyone with any links to how to disassemble trigger and adjust be appreciated.
    Further to what has already been written re trigger, I had some real trouble with mine because some 'worthy' had assembled it incorrectly in the past. Gundoc posted a very good factory diagram of the assembly. To lighten the trigger I replaced the trigger spring with an aftermarket Tikki T3 Yo Dave spring as they are near enough the same length and diametre. The trigger 'Pall' / sear engagement can also be adjusted but I left it with full engagement as I dont trust the slop on old pins etc to be safe if adjusted. All parts were polished on the faces that contact the box. The internal walls of the box also polished. Polishing made a marked difference
    Ended up with a very good light trigger that has a little backlash and creep but is totally safe
    Micky Duck and BSA270 like this.

  3. #3
    Member ANTSMAN's Avatar
    Join Date
    Dec 2011
    Location
    Wellington
    Posts
    2,697
    Quote Originally Posted by Moa Hunter View Post
    Further to what has already been written re trigger, I had some real trouble with mine because some 'worthy' had assembled it incorrectly in the past. Gundoc posted a very good factory diagram of the assembly. To lighten the trigger I replaced the trigger spring with an aftermarket Tikki T3 Yo Dave spring as they are near enough the same length and diametre. The trigger 'Pall' / sear engagement can also be adjusted but I left it with full engagement as I dont trust the slop on old pins etc to be safe if adjusted. All parts were polished on the faces that contact the box. The internal walls of the box also polished. Polishing made a marked difference
    Ended up with a very good light trigger that has a little backlash and creep but is totally safe
    yeah mate- I saw that post by Gundoc and sent my trigger to him for a tidy up- its now brilliant 2 stage, first pull is like 1 or 2mm and then crisp let off ,I'm very very happy.
    Micky Duck and BSA270 like this.

 

 

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!