Hope the old Trojan mechanical brakes are in good nick ;) Coz they are non existent now in that vintage. If you get really stuck on the reco of the running gear, flick me a PM and I'll see if I can help with anything needed.
Printable View
Hope the old Trojan mechanical brakes are in good nick ;) Coz they are non existent now in that vintage. If you get really stuck on the reco of the running gear, flick me a PM and I'll see if I can help with anything needed.
FFS, dont use tergo-strip. amazing on paint removal but eats alloyQuote:
Originally Posted by Nibblet
Slowly getting there!
Attachment 78749
Howz this mate???
Attachment 78752
I used to use this industrial stuff on my cars, its a gel, just paint it on with a brush cover it in gladwrap leave it for a bit pull the gladwrap off, paint sticks to wrap and roll it up throw it in the bin paint is gone, no mess no fuss, just don't get it on your skin because it burnsQuote:
Originally Posted by Tertle
And they blame the farmers for our shit water quality :PQuote:
Originally Posted by Nibblet
Mainly just the stupid ones.Quote:
Originally Posted by Gibo
Sent from my SM-G930V using Tapatalk
Slowly getting there
Attachment 78755
Attachment 78756
[QUOTE=A330driver;652982]Howz this mate???
that look stunning! whats the inside like?
We did it out,will get the bro to send me some other photos....halves......have a mate who’s an upholsterer.....very basic but everything can be turned into eating or sleeping quarters....
at the moment I'm just going to concentrate of painting it and making it weather tight.....will need to get front window sorted and the rubber trim around the other opening windows, then i will look at the wheels, breaks and drawbar.......then the inside,, but I'm after a very basic inside that can be turned from a eating sitting to sleeping so very keen to see your set up. Ive got 3 x 100 amp hour deep cycle batteries that will go in soon which will have solar set up but other than that its a semi clean slate!Quote:
Originally Posted by A330driver
If you are thinking the 3M / scotch pads I found them more aggressive than the wire wheel. And you are right, the wire wheel is probably too aggressive too....Quote:
Originally Posted by Tommy
I would try what Tommy said,some sort of angle grinder attachment will be the easiest to use with the least mess and has the bonus of removing any corrosion and keying up the surface for priming.
I'm not super familiar with paint strippers, but the ones I've used just loosened up the paint so still needed to be scrapped or scrubbed off. Having the rough surface may make this less than ideal.
Spec strip is what we called it, not sure what the full name is.Quote:
Originally Posted by Nibblet
Was horrible stuff to use, the fumes put off were horrific and the tiny bit on your skin would burn like crazy. Worked well as a paint stripper though.
I'm taking a day off.....read really freaken sunburnt, going to potter inside the caravan today!!!!!Quote:
Originally Posted by Beetroot
Ive been using a Norton product, a Blaze rapid strip, and as long as you don't sit it there on one spot it works a treat! I've just gone through my second one, the trick is not to sit there in one place as i have used it once before of one of my trucks i repainted and i soon learnt to watch for the metal overheating.
where i can't get into an area thats just too fiddly I've a set of wire wheels with various heads that I've used, I've even just taken to areas with a wire brush. The problem has been the odd textured aluminium sheets, they i have water blasted the buggery out of them, wire brushed the hollows and lightly buzzed the tops, its moved the bulk but there are a few odd spots of paint.
I've then gone over it again with an orbital sander, except the rivets, I've been real careful around them, i tried a spot sand blaster from super cheap..........that was possibly money better spent on lotto!
Now Im getting to the exterior paint selection and options. Ive keyed the alu so now I'm looking to etch, prime and then undercoat, working out if its cheaper to do myself or pay? I've got no issue in learning how to do this myself, but what things would cost me to do this as apposed to someone set up to do it is something I'm taking into consideration? mind you if i buy stuff its mine for future random projects??
This reads, more stuff collecting dust in the garageQuote:
Originally Posted by Tertle
