Thread: DIY ACD (anti cant device)

Bit of a fun little project. I used a budget scope ring that I had in my spares box, a cheap string line level from the $2 shop (comes in a pack of three for $2).



The ends of the level sticks out a bit, this will be trimmed flush on the lathe. Finally I'll add a drop of glue to fix in place.

Kj

You can see the ends here, this can be trimmed back without causing any leaks.

Should sit perfectly flush when done.

Kj

And finished, with a dab of glue and a bit of black paint on the machined surfaces

Not bad for about $6 all up for ring and level.

Kj