Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Alpine Ammo Direct


User Tag List

+ Reply to Thread
Page 3 of 8 FirstFirst 12345678 LastLast
Results 31 to 45 of 116
Like Tree23Likes

Thread: DIY Night Vision

  1. #31
    Member
    Join Date
    Aug 2012
    Location
    South of Wellington
    Posts
    463
    Quote Originally Posted by PerazziSC3 View Post
    yep will do, im a bit retarded when it comes to wiring shit up so might be interesting. Think my main problem is going to be finding a suitable camera lens without blowing to much money.
    Keep an eye on Ebay or Trademe for a buggered Night vision unit. That way you will have a fast front lens, eyepeice and the power supply can most likley also be used. Most of these tubes will run on 3vt.

  2. #32
    Member
    Join Date
    Aug 2012
    Location
    Christchurch
    Posts
    4,607
    ok any nightvision unit e.g gen1 will still have an ok lens and eyepiece?

  3. #33
    Member
    Join Date
    Aug 2012
    Location
    South of Wellington
    Posts
    463
    Quote Originally Posted by PerazziSC3 View Post
    ok any nightvision unit e.g gen1 will still have an ok lens and eyepiece?
    Yes pretty much though the bigger the front lens the better. Keep magnification below 4x as the higher you go the dimmer the final picture will be with a given tube. Most nv units and in the 1x-2.5x range.

  4. #34
    Member
    Join Date
    Mar 2012
    Location
    wellington
    Posts
    468
    oh wow this is neat might have to give this a crack too !

  5. #35
    Member
    Join Date
    Aug 2012
    Location
    Christchurch
    Posts
    4,607
    ok think im sorted for a lens, doing as beavis sugeested, $35usd 50mm f1.4 off aliexexpress. as for the eye piece, im thinking that would need to be of reasonable quality? do you think 8x is ok @Beavis or any other comments on it?

  6. #36
    Member Beavis's Avatar
    Join Date
    Dec 2011
    Location
    Taupo
    Posts
    4,891
    An 8x 6 dollar loupe is what I am using, while I wait for my PVS 2 eyepiece from the bloke in Israel.

  7. #37
    Member
    Join Date
    Mar 2012
    Location
    wellington
    Posts
    468
    so are the 3 parts to the night vision ? front lens the intensifier tube and this eye piece correct ? did you get the rubber eye piece beavis ?

    Lens for Varo Night Vision Monocular Eyepiece Device Rubber Eye Shield Ring | eBay

  8. #38
    Member Beavis's Avatar
    Join Date
    Dec 2011
    Location
    Taupo
    Posts
    4,891
    Yip your onto it. I Got the one without cuz I'm cheap

  9. #39
    Member Beavis's Avatar
    Join Date
    Dec 2011
    Location
    Taupo
    Posts
    4,891
    So I went for a walk with the missus down to one of the local parks. It is a good test because the trees block out the majority of artificial light from the houses. It is a mostly over cast night, with quite a bit of moon glow on the ground and clouds. Note that my camera is just a cheap digital jobby with an F 2.8 lens, the sight picture is very crisp and clear with the naked eye. I did my best.

    Taken in almost total darkness, couldn't see down the path. Some light is leaking through from houses though, but none perceptible with the naked eye.



    The following pictures were taken under a good amount of moon glow. I couldn't see Amy up the path with my eyes (they do suck though).





    The fence is 15yds away I guess. Was too dark to make it out at all.



    Same fence from I'm guessing 5oyds away, taken under trees. The fence was shrouded in total darkness and where I was sitting it was totally dark.



    Looking at Amy under tree's.



    Looking under the trees towards the foot path, about 75yds away. I could see it clearly but it didn't show up in the photo.



    Looking at Amy down the end of the foot path



    What you see out on the street



    Most of these photos were shot with the "gain" set to half way or three quarters. Set to full in total darkness.

  10. #40
    Tread carefully in the suck... ishoot10s's Avatar
    Join Date
    May 2012
    Location
    NW of the true capital...
    Posts
    1,903
    Shit Beavis, that's bloody great. I can see myself having a crack at one of these too. Btw, does Amy always walk around at night in a bikini?
    Scouser likes this.
    10MRT shooters do it 60 times, in two directions and at two speeds.

  11. #41
    Member
    Join Date
    Mar 2012
    Location
    wellington
    Posts
    468
    those pictures look great, hey beavis whats the diff between the american intensifier tube and the British one ? much the same ? found that forum you must have been looking at from the states but no one mentioned the usa one from Israel they where all buying the British one

  12. #42
    Member Beavis's Avatar
    Join Date
    Dec 2011
    Location
    Taupo
    Posts
    4,891
    Quote Originally Posted by ishoot10s View Post
    Shit Beavis, that's bloody great. I can see myself having a crack at one of these too. Btw, does Amy always walk around at night in a bikini?
    Only under strict supervision, as you can see
    Scouser likes this.

  13. #43
    Member Beavis's Avatar
    Join Date
    Dec 2011
    Location
    Taupo
    Posts
    4,891
    Quote Originally Posted by turner nz View Post
    those pictures look great, hey beavis whats the diff between the american intensifier tube and the British one ? much the same ? found that forum you must have been looking at from the states but no one mentioned the usa one from Israel they where all buying the British one
    I read that the British ones have a power supply cut off if they are exposed to bad light, I'm not keen to try, though I did expose it to light once accidentally and it didn't appear to do damage. This thread has a little Varo vs EEV debating Night Vision Forum at Nightvisionforums.com • View topic - Cascade night vision project I think for our purposes it will be much of a muchness. I have learned a lot through the course of this project, but some of the technical jargon is still way over my head.

  14. #44
    Member Beavis's Avatar
    Join Date
    Dec 2011
    Location
    Taupo
    Posts
    4,891
    A bunch of stars you can't see with the naked eye



    It's clouded over unfortunately

  15. #45
    308
    308 is offline
    Member 308's Avatar
    Join Date
    Dec 2012
    Location
    Wairarapa
    Posts
    3,949
    bloody impressive results for not much cash outlay - fine work

 

 

Similar Threads

  1. Night Vision scope
    By Wirehunt in forum Firearms, Optics and Accessories
    Replies: 34
    Last Post: 21-06-2013, 04:54 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!