Thread: Going to fix my CZ stock - help!

Good advise from Moa Hunter.

I quite like the quick clamps that fuller make. Rubber tips on them and I've found they to give enough pressure for wood gluing.
Using bog standard gorrila PVA wood glue I've glued a few bits of wood with a simple butt join and then break tested. Every time the timber has failed before the glue join. Mostly using that glue because it was in the local shop.

From the look of the break, if you take care when applying pressure with the clamps it should line up pretty well perfectly and the join will be hard to spot. Wipe up any excess glue that will ooze out with a damp rag, easier than scraping off when it's set.

Hopefully someone who knows what they are doing will be along soon. @gundoc