ideas for building a rifle out of stuff i have lying around

so im patiently sitting around waiting to be let out of my cell and my thoughts turned to getting another custom rifle built out of stuff i have in the parts dept so ive got a what i think is a brazilian 7x57 mauser with custom bolt and a timney trigger that seems to like shooting its bullets sideways and barrel seem a bit short for my liking and ive got a ruger american standard 3006 barrel that would be lucky if its had 100 rounds through it so i was thinking maybe a rechamber into something and screw it together if its that easy ive got scope mounts etc if this got off the ground i would probably replace the stock at some stage as well so looking for ideas as havnt really dabbled in 30cal territory

Quote:

---

Originally Posted by northdude

so im patiently sitting around waiting to be let out of my cell and my thoughts turned to getting another custom rifle built out of stuff i have in the parts dept so ive got a what i think is a brazilian 7x57 mauser with custom bolt and a timney trigger that seems to like shooting its bullets sideways and barrel seem a bit short for my liking and ive got a ruger american standard 3006 barrel that would be lucky if its had 100 rounds through it so i was thinking maybe a rechamber into something and screw it together if its that easy ive got scope mounts etc if this got off the ground i would probably replace the stock at some stage as well so looking for ideas as havnt really dabbled in 30cal territory

---

Do It. You know you have to. Keep it as a 30 06 though.

30 Gibbs.

Quote:

---

Originally Posted by Steve123

Do It. You know you have to. Keep it as a 30 06 though.

---

not sure if action and mags long enough for a 3006

Quote:

---

Originally Posted by northdude

not sure if action and mags long enough for a 3006

---

Peen out the front of the Magazine box and mill a notch in the rear of the receiver ring and it will be.

Sounds like you have the makings of a nice Rife,if you need a stock let me know.

Have a Google for ruger American barrel thread sizes and the Mauser receiver thread

If they're not the same check the diameter of the barrel chamber end and the diameter of the Mauser thread.

If there's enough meat in the barrel you may be able to chop the thread. Re thread and re chamber

same diameter but different pitch .
I am not sure if you would have even enough meat on the ruger barrel to cut all the threaded section which is so long with the barrel locking nut area, and be able to push the 308 chamber out without compromising and weakening the front of the chamber due to lack of material?

rugers 1x16 not sure what a mauser is might possibly get away with making it a 308 need someone who knows more about these things to eyeball it i guess

Quote:

---

Originally Posted by norsk

Peen out the front of the Magazine box and mill a notch in the rear of the receiver ring and it will be.

Sounds like you have the makings of a nice Rife,if you need a stock let me know.

---

that may be handy cheers ill see how it progresses

Mauser is 12 or 14 tpi on top of my head.

Quote:

---

Originally Posted by northdude

not sure if action and mags long enough for a 3006

---

30/284?

Should this not be in “things people said before an ambulance was called” thread?:o:thumbsup:

Evening.

The sized are as follows:
Mauser: diameter 1.1" x 12 Tpi(55°)
Length: 0.65 - 0.7"

Ruger American: diameter 1"x 16tpi
Length: 0.695"

The mauser action length wise will take 3006, parker hale was doing it form the 50's. If your game you could rethread the ruger tenon to 22 x 1.5mm, bore out the mauser barrel, thread it 22 x1.5mm you get the idea.

Quote:

---

Originally Posted by Sideshow

Should this not be in “things people said before an ambulance was called” thread?:o:thumbsup:

---

Whys that I'm sure people have built rifles out of mauser actions before

Quote:

---

Originally Posted by Walker

The mauser action length wise will take 3006, parker hale was doing it form the 50's. If your game you could rethread the ruger tenon to 22 x 1.5mm, bore out the mauser barrel, thread it 22 x1.5mm you get the idea.

---

id be game if its a way of doing it cant see problems doing it that way any one with experiance willing to point out pros and cons is this what they call barrel stub method also id go for more 308 type of thing

or the other way to do it is does anyone have a half decent 7x57 barrel they want to sell or swap ive got a 3006 barrel

@northdude Maaaate. I've got a pre loved parker hale Mauser 308 barrel a week ago you could have for bugger all. I'd have to check the thread tenon to confirm
BUT a comment earlier on this post has me wondering. I have a parker hale 7x57 with a naff barrel and a mint 270 barrel for it-need to have a look and see how long the mag box is. If it gets too hard I'd keep it for the project
keep you posted

ok keep me in mind i dont need a 270 tho iv got a 6.5 06 that covers that base 7x57 would be the one id got for if one comes up

Nope you weren't getting that one if I can help it-I'd much prefer to keep the 270-got a shit ton of stuff ive been accumulating for that.
we'll see

270 fits in a parker hale, had one once but wasn't really my cup of tea.