Thread: Identify this action and barrel?

I picked up an old target rifle for cheap, to use as a project, for no special reason.

It has a very heavy fluted barrel which I have no use for, but just trying to figure out what other barrel may fit. The thread is about 1.06-1.08" (1 & 1/16th??) or 27.2mm. This measurement should be more accurate but thats what you get with $5 calipers from aliexpress. Its got a 16TPI thread. Would I be right in saying that this is the same as Rem700?

I don't know what the rest of the action is based off, I assume its custom made by someone. The front half of the bolt is M98 style with front lugs and mauser extractor. Anyone seen something like this before?

Musgrave

16tpi might be tikka if its an inch

https://www.nzhuntingandshooting.co....-barrel-45850/

@-BW- Google Musgrave 7.62 RSA action and you will see lots of images of that exact action

Thanks @akaroa1 that clears that up!
I have never seen these actions before now, and I had only been familiar with the Musgrave name in connection with ammunition and the 6mm Musgrave calibre.

Originally Posted by Bill999

16tpi might be tikka if its an inch

https://www.nzhuntingandshooting.co....-barrel-45850/

Its just over an inch, so maybe a little large for a tikka barrel. Apparently rem700 is 1 & 1/16th

Looks to be 1 5/64 - 16 TPI so way bigger that you are likely to pick up something used to spin on
Unless you find something with plenty of meat on it to turn a new thread and cut a new chamber

Well its right on the line between 1 1/6th and 1 5/64th so you might get lucky with a M700 barrel

That cb has me thinking collings and brady action before changing name to goodwin maybe send pic to mike collings

Originally Posted by m101a1

That cb has me thinking collings and brady action before changing name to goodwin maybe send pic to mike collings

It’s a musgrave. Made in SA

If you don’t like the action, I ll buy it of you before it get molested :-)

https://www.musgraverifles.co.za/musgrave-history

It has Lyttleton RSA engraved on the side.
Perhaps someone in Christchurch built it in the early 70's.

Can you show us the stock ?

Originally Posted by Bagheera

It has Lyttleton RSA engraved on the side.
Perhaps someone in Christchurch built it in the early 70's.

Can you show us the stock ?

Republic of South Africa

I think the question has been well answered but Musgrove make great actions and the trigger is excellent.Mine in 6.5/08 is very accurate although a little heavy.