K.I.S.S. Action Wrench

Looks like its made outta brass in those photos :XD:

Quote:

---

Originally Posted by ebf

Thought it was pretty basic....

Wanted the nut fairly far back so the socket wrench would not hit the scope.

Still thinking about different options for clamping the barrel. Trying to come up with a clever way to be able to do it without taking the scope off....

---

Solution for barrel clamp sorted too
Attachment 27235

Quote:

---

Originally Posted by veitnamcam

how long is action? to short for 06 cases?

---

VC, did some measurements this afternoon.

Bolt goes back 80mm, ejection port is only 69mm, and max mag length is 74mm...

Quote:

---

Originally Posted by ebf

VC, did some measurements this afternoon.

Bolt goes back 80mm, ejection port is only 69mm, and max mag length is 74mm...

---

What twist is the barrel?

My 30-284 is running at my max mag length(but I have a cunning plan;) ) which currently means a OAL of 74.5mm,with a 178amax it is seated deep enough to be using up some powder room, that said it is still pushing them out just shy of 3k (25" barrel)very happily with acceptable long range hunting accuracy.
It would no doubt go better seated out longer if you wanted to single feed.

But I am not sure you would see much gain in light for cal bullets?

eben , I am more than happy to tig some nice clamping points anywhere on your barrel !!!!!

begone ye heathens !

there will be no welding of loudners, clamping points etc !

where is your kiwi d.i.y. spirit ? could swear some of you are frightened of a bit of back-yard engineering and invention :D

hence my offer of tigging!!!!!

Why not clamp the action and mil couple little flats on barrel for a spanner? Think other way around would save taking scope off.

Sent from my SM-G900F using Tapatalk

eben , I can also mill some flats !!!!!!
all your troubles solved !!!