Thread: Kimber Montana 7mm-08

Thought I'd put an update of where I'm at with this rifle.

In the end I settled on Privi Partisan Brass with 41 gr AR2206H and a 120 gr Sierra

I'm unsure of the speed but accuracy is great with this being a typical 4 shot grouping. The fourth shot is always s a little wide but I put this down to the pencil thin barrel having warmed up.

Hi Seventenths,

I really appreciate this post. I have been looking for some load recipes for my Kimber Montana 7-08

I am new to reloading, and so keen to not reinvent the wheel.

Can I please double-check that the projectile you are using is the .284 CAL 120 GR SPT PRO-HUNTER? Link is below.

https://www.sierrabullets.com/produc...pt-pro-hunter/

Also, in terms of overall length, do you have any tips on seating depth, etc.?

Do you have any other loads you have had success with?

thanks so much!

Originally Posted by bokhunter

Hi Seventenths,

I really appreciate this post. I have been looking for some load recipes for my Kimber Montana 7-08

I am new to reloading, and so keen to not reinvent the wheel.

Can I please double-check that the projectile you are using is the .284 CAL 120 GR SPT PRO-HUNTER? Link is below.

https://www.sierrabullets.com/produc...pt-pro-hunter/

Also, in terms of overall length, do you have any tips on seating depth, etc.?

Do you have any other loads you have had success with?

thanks so much!

I might be mistaken but I think this is in my care now, still out there doing the damage.
I run 44gr 2208 pushing a hornady 154sst
max length that fits in the mag

my groups are not as one holey as his tho