Your in a boat you shouldnt need to be doing any serious casting
Printable View
Your in a boat you shouldnt need to be doing any serious casting
You sit up front one leg either side of really must get right up there....plenty room in boat itself without doing Kate n Leonardo impersonation!!
you sure do have a vivid imagination micky!Quote:
Originally Posted by Micky Duck
only progress tonight is the construction of a floor for the middle and some sealant on the internal seams.
It was upcycled from some construction trash. some nearly full sheets of treated half inch ply just chucked in the skip! The holes are for bungee cording the fuel tank or chilly bin.
in 3 weeks time I won't be on call so we shall do a decent mission with it! probably rangitoto or waiheke depending on how many litres per hour it leaks.
Attachment 259311
Attachment 259312
Is it treated i.e. tanalised? If it is, seal the ply with epoxy wood sealant and paint it - the treatment can cause corrosion when in contact with ali and seawater... Should be OK if it's painted though. Other option is glue some rubber around the edges where the contact points with the ali are, that would do it too.
The closed cell foam mats from Bunnings,big interlocking squares in bottom will help keep feet warm and stop lots of knocking noise if drop stuff inside boat...tends to not be noise problem if dropped outside lol.
I have painted it with an epoxy paint. I'll do another coat in a few days.Quote:
Originally Posted by No.3
