Thread: My 6.5pr build

Brought this off Greg at terminator, all load developed etc in a bit of an abused mdt tac21 chassis with a Tikka action and Bartlein barrell
After owning it for a while, and noticing how ugly it looked I decided to start changing it. So I ordered a 15" forend from mdt, new greystone 6k supressor. And got the bolt fluted and a new knob. Once I had the new bits, I sent the rifle to Alan carr to trim the barrell back to the position of the new forend due to arrive and rethread it. Sadly, upon picking the rifle up Alan realized as did I, that the barrell was cut too short. Simple mistake, and Alan came to the party and purchased a new kreiger barrel and fitted it up to the correct length etc. I then had the get the first 2 inch of the forend internals slightly trimmed for the supressor to slot just inside the gaurd.
And the disassembled, and sent the whole thing to my mate Alistair at armaworx for cerakoting. He and his Mrs
Do a great job, and we decided on the colors which you see before you now.
Sadly my load has completly changed , and a new development is on the cards.

Hope you like it, I just need to get it to preform as well as it did when I first purchased it.