My CZ 457 LRP Makeover

I’ve been planning this project for a while, but only got stuck into it in December.

If interested, here is the whole process I followed documented with photos: https://www.leru.io/2024/01/my-cz457...r-journey.html

https://uploads.tapatalk-cdn.com/202...7541d3dddf.jpg
https://uploads.tapatalk-cdn.com/202...dbb97893b1.jpg
https://uploads.tapatalk-cdn.com/202...dbf0e0fc5c.jpg
https://uploads.tapatalk-cdn.com/202...9d1780e5db.jpg
https://uploads.tapatalk-cdn.com/202...67d59584ad.jpg


Sent from my iPhone using Tapatalk

Oi! You don't mention how it shoots! The integrated bag rider (right nomenclature?) looks awesome.

Quote:

---

Originally Posted by Tentman

Oi! You don't mention how it shoots! The integrated bag rider (right nomenclature?) looks awesome.

---

I have only been to the range with it once so far, and I still have to get the appropriate Tuner settings figured out. But here is the results I got shooting RWS Special match and going from 0 on the tuner to 16:

At 25m:
Attachment 241527

At 50m:
Attachment 241528

I think somewhere between 8 and 10 for this batch of ammo will be good - unfortunately, the wind caught me out when I was shooting the tuner at setting "10" at 50m, so the vertical dispersion is not good, but I think it would have been within the top 3.

Need some more testing, but the initial results look promising!

Oh, forgot to mention that they were all 5 shot groups

Very nice ! what ammo u used ?

ahhh never mind just saw it RWS Special match !

This design looks dope.
I'm also shooting a 457 lrp on PRS matches and it's a wonder.
This past weekend I was shooting it at 200m with SK long range match and it was surprisingly accurate for the distance.
Is there any chance that you could share the 3d printed file of the bag rider?

Quote:

---

Originally Posted by jgill79

This design looks dope.
I'm also shooting a 457 lrp on PRS matches and it's a wonder.
This past weekend I was shooting it at 200m with SK long range match and it was surprisingly accurate for the distance.
Is there any chance that you could share the 3d printed file of the bag rider?

---

Sure. Send me a pm with you email.


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by janleroux

Sure. Send me a pm with you email.


Sent from my iPhone using Tapatalk

---

Hey thank you so much!
Apparently, I don't have the PM's function enabled and the site admin didn't reply to my message.
Would you mind contacting me through this protonmail address, and then I'll reply from my personal email? ribandspeech@proton.me
Thanks!

Quote:

---

Originally Posted by jgill79

Hey thank you so much!
Apparently, I don't have the PM's function enabled and the site admin didn't reply to my message.
Would you mind contacting me through this protonmail address, and then I'll reply from my personal email? ribandspeech@proton.me
Thanks!

---

Did you get my email with the stl?


Sent from my iPhone using Tapatalk

Yes! Thank you so much!
Going to print it right away.