Norinco model 4 early JW15

Just finished doing a quick restore of a JW15 manufactured for ClayCo in Kansas USA mid 1980s
Got the gun recently off the for sale site just for local pest control, decided to clean it up a bit and
Made the decision to shorten barrel to 17” a good polish up re crowned cold blued and pleased how it’s
Turned out. It had a Nikko silver crown on top but I would like (I think) but still thinking of 2-7x32 bushnell rimfire
If anyone has one. Trigger feels very good and this early one has the over travel screw as standard.
The stock needs a clean up but I’m going to use as is for the time being as I want to introduce it to the bunnies.Attachment 267057

Attachment 267058Attachment 267059Attachment 267060Attachment 267061Attachment 267062

Want to put smaller scope on than the Nikko 4x32

physically smaller scope or just less magnification? I've got a 1-4x20 Barska scope I picked up from a member for $50 that I'm no longer going to use.. but it probably weighs more than the 4x32 you currently have.

Sorry Nikko is 4x40 anyone want it ?

This Nikko has cleaned up nice lenses were covered in dust I will give it a try out.

Nikkos are good scopes for the money

reduced barrel length to about 17 inches re crowned and cleaned up nicely and re blued. A good polish of the trigger a bit lighter spring and slightly lighter firing spring bump tested all good, on to the stock which is old but feels nice so free floated barrel channel as was a bit warped and I fitted steel pillars and epoxied action and first inch of barrel to stock then today the postie delivered a tiara 4x28 Nikko sterling scope so decision to be made which scope Attachment 269289Attachment 269290Attachment 269291Attachment 269292to use, a no brainer for me the 4x28 tiara it just fits nice on this gun and cross hairs nice clear and fine. Hopefully it does the job which I’m sure it will then there will be a free 4x32 Nikko sterling to someone and an old gold crown 4x40 for a box of ammo.
Norinco model 4 made in 1983 and Tiara 4x28 more than likely older than that I’m sure these two oldies will do the job.

Thanks to Zimmer for the 4x32 and 4x28 much appreciated.

Looks good mate, what cold blue did you use?

Quote:

---

Originally Posted by makka

Looks good mate, what cold blue did you use?

---

And how many coats did you apply to get it looking so good?

Got rid of all surface rust came up well no pitting anywhere used this old gun blue I’ve had for a many years only marks on photos is dustAttachment 269397 only one application it’s been a good product on all guns I’ve done. Polished back to bare steel with fine wet and dry paper.

Hunting and fishing has it but price about $49 I got mine years ago, it is a paste mine is anyway probably because it’s old it only goes liquid as you apply it leave a couple of minutes and clean off with water, I used near on boiling water and then dried and a wipe down with gun oil.

Attachment 269985Attachment 269988Attachment 269989Attachment 269990

my first rifle in early1970s was a stirling model 14 with nikkostirling 4x28tiara scope on top .ive lost ocunt of the jackos and bunnies that fell to that wee combination.Ilater put a 4x40tasco ob that rifle for jackos and spotlighting -very very few got away with a deadly rabbit ammo hollow point in the swede .
18months ago a very kind poster on here gave me a stirling plus scope and another buitler me a custom suppresor -yup i love it .
Im a lifelong fan of nikkostirling and tasco scope and their relation the bentley range . my bentley 4x28 and 4x40 lasted me 30+years before succumbing -4x40 atop ye old .303.

One of the best combinations I’ve had was a tasco 3-9x40 Japanese atop a weirauch mid 80s loved it and sold it mmm.
This Norinco and the Tiara should be a nice duo, my eyes not as good but should be ok and the setup is nice and lightweight, I’m pleased how it’s performing.

Rabbit Stu old son id say in the right hands it d be bloody deadly and just goes to show even the top two inches (human) can be trained to perform!
Ive got a similar gun synthetic stock which Ive nicknamed the truck gun!I can remember a couple of couple of smartarse rabbits who suffered permanent memory erasure courtesy of it!
mine is scoped suppresor and bipod -bloody handy over the bonnet of the truck or tailgate for that matter.

Kōtuku I would say old old son, I loved open sights the best but as the old eyes can’t focus on both front and rear sights needed to have a scope, and also never needed a rest but now usually carry a simple short wooden bipod with a leather strap to rest the gun on, unfortunately the things we have to do eh! Enjoy the truck gun mines not suppressed but by the time the bullet hits them all they hear is a BAxx then I walk on to the next spot. Good shooting to you.
Stu

After having a nice chat and advice from Mudgripz about good modifications to the jw15 and his help finding working attire she now only wears her Tiara on special occasions and now when she’s working she wears a Bushnell Banner 3-9x40
Unfortunately only got hi mounts to see how she does but should be ok.Attachment 270388

Tikka rings fit these if you want lower setup.

A better scope height with these rings but will need to give the a black spray, needed to take material off bolt handle but all done.Attachment 270524