Old school rifle , almost done

Hi Guys ,

Here's a quick pic of my Parker Hale 308 rifle , its a crappy pic , done at night , will get some better ones later .

Its a Parker Hale M87 magazine feed repeater , 308 cal , with a PH TX1200 ( target rifle ) profile barrel , 1-12 twist , its got s Parker Hale C3A1/Unertl scope mount & a USO MST-100 scope , thats cammed for 308 .

It only needs a McMillan glass A2 stock to complete the build , then it will look very close to a Canadian C3A1 rifle .

Later Chris

http://i33.photobucket.com/albums/d9...ps32df6bb7.jpg

Hope to shoot it in the next week or so , and will get some day pics of it , they should be much better in showing what the rifle really looks like etc .

It uses a 6 rd detach box mag , and the scope is the same that the USMC used on their M40A1 sniper rifles , the scope is a all steel/SS body , and is a fixed 10x , front lens is I think 42mm , tube size is 1 inche , the elevation knob has clicks at 100 yard intervals , going 1-10 , meaning 100-1000yds , and under it has a fine elevation lever , that concept has been used in the latest NF Beast scope .

Cheers Chris

That would be fun to shoot.

Very nice Chris

Looks & sounds the 'mutts nuts'....nice rig mate!

Heres some better pics , daylight , shows the very sturdy & solid scope mount , it uses 3 large bolts to secure it to the action .

http://i33.photobucket.com/albums/d9...ps785741dd.jpg
http://i33.photobucket.com/albums/d9...psf63425db.jpg

http://i33.photobucket.com/albums/d9...ps4160a2c5.jpg
http://i33.photobucket.com/albums/d9...ps4145851d.jpg

Very nice Chris

Thanks Guys , it taken a long time to get to this stage , the mount was virtually un-obtainable , search for one for years & years , and was almost going to have a gunsmith make a scratch built one up from grainy photos , even photos of the C3A1 rifle are hard to find , let alone a close up of the scope mount .
I am dying to try her out , and in time she will wear a McMillan A2 camo stock hopefully .
But for right now , I am just going to shoot her as is .

Cheers Chris

P.S. I am working also on her partner , a clone of the USMCs M40A1 rilfe , it will have the same scope , USO MST-100 , and will be very close to a M40A1 , where it will be different is I will use a steel Badger floor plate , instead of the 2 piece cropped Win M70 floor plate .

Nice

Sent from my LT26w using Tapatalk

I like that a lot Chris. Nice work.

Also, I would take your MST100 over the BEAST all day, everyday!!!

Yeap , neat scopes , BUT they are outdated , and have their own little kinks , one is the front lens adjustable parallex , basically , donot touch it ,as if you stuff it up , you can spend all day trying to get it right .

I have another MST-100 , & its going on a USMC M40A1 clone , that ones a few more mths away .

Later Chris

Here's a couple of pics outdoors , doing a 200yd zero .

http://i33.photobucket.com/albums/d9...psaae5a8de.jpg
http://i33.photobucket.com/albums/d9...ps2861e635.jpg
http://i33.photobucket.com/albums/d9...ps7beae749.jpg
http://i33.photobucket.com/albums/d9...psc0619d47.jpg
http://i33.photobucket.com/albums/d9...ps87891c86.jpg

Bolt handle looks kinda similar to my Omark 44

She's a beauty Chris

YES , I am happy with her so far , but early days yet , the method of zeroing the MST-100 scope are a little tricky , not your normal procedure thats for sure , it cycles very smoothly , more than I thought it would , runs a double stack / double feed PH 6rd magazine .
RE: the gray aluminium bolt knob , thats std for the M85 & M87 Parker Hale rifles .

Cheers Chris

Hi, nice, but instead of the A2 I would have put a Mchale:McMillan Tactical Stocks, McMillan Fiberglass Stocks, Synthetic Stocks, Tactical Stocks

That would have looked more like current wooden stock.
Friwi

I am familar with the McMillan fibreglass " McHale " stock , as it is basically a McM glass version of Parker Hales wooden stock used on their M85 & M87 rifles .
My M85 has a McHale stock , and you are right they are a very nice size/shape , and very over looked , I like it over all the other Tactical type stocks that McMillan make .

BUT , as its meant to be a reproduction of the Canadian C3A1 rifle , then I am limited to either a old wooden stock off a TX1200 Parker Hale target rifle , or a McMillan A2 fibreglass stock , and in a rifle like this , I prefer glass over wood .

But of all the McM stocks , I seem to like the A2 & the McHale stocks over all others .

Cheers Chris

hi Chris

Whats the shiny bit at the front, looks to small to be a suppressor?

Nice rifle!

Cheers

Dino

very nice chris

Thanks guys ,

Yeap see is a very special rifle , for me any way , only 2 things remaining , A2 McM glass stock & blue the polished extractor .

GOOD news , I just got notification that my other USO scope & M40A1 mount are here , NOW just need to wait till they are open , maybe in a weeks time .
They tryed to deliver , but I was at work .

Its going to be a LONG wait .

Cheers Chris

Thanks to a Canadian forum member , I have a C3 cleaning kit & badge , he saw the pics of this build and just sent it to me , top bloke .

Here's a pic

http://i33.photobucket.com/albums/d9...ps63b436fe.jpg

that's an awesome looking rifle Chris, love the stock that's on it!! I use to have a TX1200, shouldn't of sold it

Quote:

---

Originally Posted by ChrisF

Thanks to a Canadian forum member , I have a C3 cleaning kit & badge , he saw the pics of this build and just sent it to me , top bloke .

Here's a pic

http://i33.photobucket.com/albums/d9...ps63b436fe.jpg

---

Well done that man....you must have been stoked when that arrived!!!!!!

I am pretty sure i saw a TX1200 stock sitting with the gunsmith. PM me if you want to talk with him.

Thanks Gillie ,

Yeap PM me the details , maybe worth having a look at it .

Cheers Chris