Printable View
I was wondering if any clever bugger's on here would be able to fabricate a couple of these picatinny rail adaptor's,it allows for a brass catcher to be attached
I'll attach some pics
Attachment 44935
Attachment 44936
Attachment 44937
Attachment 44938
Attachment 44939
Attachment 44940
Attachment 44941
Could you cut down a chunky scope mount?
I thought about trying to do that ... I have very limited tools and experience etc .. it could be a track I may end up going down ..If you have any suggestions Kimjon id be keen to hearQuote:
Originally Posted by kimjon
I can't quite figure out the attachment method for the bag? But something like this could possibly be made to work?
https://touch.trademe.co.nz/listing/view/1016891612
But not 100% sure as I don't have all the information. What I have learnt in life is its easier and cheaper to try use something that already exists most of the time, rather than build from scratch.
Kj
something like that might work ,this is how the bag attaches
Attachment 44953
Can't you buy the rail attachment separately ?
I use the Caldwell one, I have two bags & 10 rail attachments.
That's what ideally I'd like to buy the attachments ,I've emailed the manufacturer..but won't hold my breath for reply or if able source/ship nzQuote:
Originally Posted by Kiwi Greg
Try reloaders. I brought one bag(and mount) plus a extra mount - so 2 firearms, one bag. They might still have them, as it was maybe 18 mths ago? $15??? may have that wrong, but it was bugger all. The extras werent on the website, needed to call.
might try drill couple holes in this mount and remove the top half and grind flat
Attachment 44954
Attachment 44955
Attachment 44956
Attachment 44957
What brand catcher @Beaker ?Quote:
Originally Posted by Beaker
Mine's a "3 Bucc"
Just found the invoice - @seano
Catcher bag -
Caldwell AR15 Brass Catcher Picatinny Rail - Magazines - Gun Parts - Reloaders Supplies Ltd
Spare mounts -
Caldwell AR15 Brass Catcher Picatinny Rail Spare Mount - Magazines - Gun Parts - Reloaders Supplies Ltd
Was a bit wrong on my memory of cost for the mounts, they were both $10 cheaper when I got them, but that was May 2014,
Yup, Reloaders have extra mounts for the Caldwell brass catcher. Unlike Gun City and Serious Shooters, if it's on the web site at Reloaders you can actually buy it.
These things?http://uploads.tapatalk-cdn.com/2016...90493b817a.jpg
http://uploads.tapatalk-cdn.com/2016...3c36973db9.jpg
My one just clips on and off with a little detent.
I have used it in a few 3gun stages now and don't even notice it is on.
Clear rifle, unclip and show clear.
Better than losing brass in the long grass I reckon.😆
Sent from my SM-G900F using Tapatalk
My quick Butchered mount attempt #1
I cut off the rings
Then drilled a couple "Wonky holes" ...
And I have ver1.0
I'll put bit black marker to cover up the steel
Will do the job ,will do the next one with bit ones precision [emoji9]
Attachment 44971
Attachment 44973
Attachment 44976
Attachment 44977
Attachment 44978
Attachment 44979
p.s sorry for the quality of the pics ...
Bit rich? This is from the dude who makes scooters?:DQuote:
Originally Posted by kimjon
Those "parallel pin" style attachment catchers are great, much better than the perpendicular rail thingy. On my 'to buy' list. Those velcro things are worse than useless.
