Still a work in progress but showing some promise. ADI 62gr 223 FMJs in this case.
https://www.youtube.com/edit?o=U&video_id=00OBICOTmCk
Still a work in progress but showing some promise. ADI 62gr 223 FMJs in this case.
https://www.youtube.com/edit?o=U&video_id=00OBICOTmCk
"I do not wish to be a pawn or canon fodder on the whims of MY Government"
Yeah link not working for me either, would be curious to see
maybe this?
https://www.youtube.com/watch?v=00OBICOTmCk
If that fails youtube search gzcwnk and look for the video....
"I do not wish to be a pawn or canon fodder on the whims of MY Government"
What's the OD of the tubular wall? Could be made from PVC pipe?
Identify your target beyond all doubt
The base plate, wall and collator plate each take about 16 hours to print. The small stuff as little as 45mins. For later mods the base and wall will probably get joined just for testing when I f*** up its a 16 hour print and not a 32 hour one!
Last edited by steven; 10-06-2018 at 03:39 PM.
"I do not wish to be a pawn or canon fodder on the whims of MY Government"
What does 6 inch / 155mm pipe cost per metre?
In theory if I alter a dimension in CAD its reflected in the part, however sometimes the result is, um totally wierd....
The OD is 158mm with a 3mm wall
The wall is a 22 hour print using 70.5m of filament, so the cost is $7.34 to print incl power.
When the print is finished though its "pre-drilled" and bolts right on.
Last edited by steven; 10-06-2018 at 03:39 PM.
"I do not wish to be a pawn or canon fodder on the whims of MY Government"
That's pretty close, so a small scale down from 158mm to 150mm.. I got given a few offcuts, 1 is about meter long so @stretch can go crazy with that
Identify your target beyond all doubt
Bookmarks