anyone stiffened up the fore end on a howa mini stock I've got some resin and threaded rod...
Printable View
anyone stiffened up the fore end on a howa mini stock I've got some resin and threaded rod...
"howa stock"....yeah right :P
Ok well it is mini😬
Dont laugh but I stiffened a plastic stock with lightweight automotive bog and bamboo skewers and it worked extremely well. I considered resin but flagged it because of the weight.
Weight doesnt bother me
Yep, I've done it and its brilliant.
One of the more accurate rifles I've owned.
I had to make do with what I had re tools, so used a grinding stone in a drill - roughed up the channel and used some 2 pack resin.
Also took the opportunity to ensure no barrel touch.
We have used this now on 3 Howas,2 Rem 700 & 2 Sako A7's . I brought one of the first Howa mini 223 to come in,it shot extremely well out of the box but l hated the stock & its flex, a mate brought one after he seen how mine shot but it did not shoot as well, so he bedded it & used this to stiffen it up, after seeing how it went l did the same with mine,the bedding job improved his rifles accuracy, but mine shot the same which l was more than happy with any way, (1/2 & 3/4 MOA with favored loads), but the stock was stiffened up nicely .I hate how bulky the Mini stock is for such a nice sized action & have decided when l get mine back from my daughter who claimed it, l am going to get a nice old school walnut stock for it as it is a keeper . This stock stabilizer does a great job on the A7's as well & puts them heads & shoulders above a Tikka when it is done justifying the extra coin IMO .
https://www.ballisticstudies.com/Kno...tabilizer.html
+1 on the stock stabiliser as above. I’ve used it a heap of times and it works brilliantly. Just make sure to prep the stock well as per the instructions. Takes a bit of time, but worth it.
Does the stabilizer add much weight ? The missus has a mini and the stock flex is quite bad . Doesn't bother her but does me !
But she likes the light weight...
Yep, potentially adds a lot of weight. I used the stock stabiliser on a CZ527 plastic stock which took a lot of material to fill all the voids.Quote:
Originally Posted by Ftx325
It worked amazingly, but I'm glad it's in a Varmint rifle, and not a mountain rifle.
Have a Rem 700 SPS Tactical in 223 that came with a hogue stock which was quite flexible. I used the terminal ballistics product to bed the action and stabilise the forend. To save weight and increase stiffness I used some old carbon fibre arrow shafts pushed into the resin. The shafts added stiffness and the hollow voids in the shafts reduced the amount of resin used and hence the weight.
Was a good solution at the time. Have since replaced stock with an aftermarket one.
We always countered the weight gain when adding the stiffner by carefully taking out some material where it is being added with the dremel , as it needs voids/holes to key in anyway & it is basically setting like light steel .Quote:
Originally Posted by Ftx325
seen it done with bamboo skewers ( light and strong) plus fi-glass resin.
i dont think my howa is flexi though
I weighed my model 7 stock prior to stabilising and bedding, and then afterwards. The stock gained 2oz or about 60g. She probably wouldn’t notice the weight difference in her hand....Quote:
Originally Posted by Ftx325
That was with the Terminal Ballistics stock stabiliser and steel filled bedding compound.