Thread: Switch barrel Brno Fox

Originally Posted by Tuidog

Attachment 144210The shanks of the 3 barrels
Attachment 144211Unthreading 300whisper barrel, barrel is loosened with a spanner I didn't take a picture but it works better with the barrel held in the vice and spanner going over the top and bottom of action next to the scope ring. I'll slip the scope ring further forward.
Attachment 144212Original 222 barrel spun in
Attachment 144213And now I've hit a problem the ribs inside the magazine will not allow more than 1 round in the mag as it the projectile contacts the side of the magazine.
Attachment 144214 I will find another magazine and will cut out the centre of the rib and trim the length down so it will become a 3 round magazine.

@akaroa1 dont look...dont look...dont look

Originally Posted by Micky Duck

@akaroa1 dont look...dont look...dont look

Mate, you guys can do what you want to those modern fangled rapid fire repeater rifles

Try and modify the magazine in one of my single shot rifles and it would be a different story