Thread: thinking about an ultra light 260 build school me up

https://www.rokslide.com/uberlight-kimber-rifle-build/

For your pleasure

For the Right money I could save you a build.. although its a rifle I would regret parting with..

6.5SLR
Lone Peak Titanium SA with 20 MOA Rail
16.75 inch Bartlein 2B barrel M15 Tread
Hawkins Custom floormetal with Wyatt long action Mag insert.
Bix N Andy Single stage trigger
Manners EH-8 in Black Forest bedded action. Grove QD Sling inserts - left side. Javelin Bipod Stock Insert.
Hawkins 30 Custom Hybrid Rings with 20 MOA
Whidden Custom Dies

Currently running Amax 130s @ around 2800 - round count > 150...

Weight is 2.7kgs bare rifle - bear in mind the Bartein 2B is a truck axle and its not fluted, although short.

Current replacement component cost $6800, add another $500 plus for chambering and bedding, and thats the cost of a new build with this spec...

If you're interested?

Originally Posted by Sidney

For the Right money I could save you a build.. although its a rifle I would regret parting with..

6.5SLR
Lone Peak Titanium SA with 20 MOA Rail
16.75 inch Bartlein 2B barrel M15 Tread
Hawkins Custom floormetal with Wyatt long action Mag insert.
Bix N Andy Single stage trigger
Manners EH-8 in Black Forest bedded action. Grove QD Sling inserts - left side. Javelin Bipod Stock Insert.
Hawkins 30 Custom Hybrid Rings with 20 MOA
Whidden Custom Dies

Currently running Amax 130s @ around 2800 - round count > 150...

Weight is 2.7kgs bare rifle - bear in mind the Bartein 2B is a truck axle and its not fluted, although short.

Current replacement component cost $6800, add another $500 plus for chambering and bedding, and thats the cost of a new build with this spec...

If you're interested?

unless your giving it away it's probably out of my league but hell why don't you pm me your asking and I'll consider it after fainting

Originally Posted by Sidney

For the Right money I could save you a build.. although its a rifle I would regret parting with..

6.5SLR
Lone Peak Titanium SA with 20 MOA Rail
16.75 inch Bartlein 2B barrel M15 Tread
Hawkins Custom floormetal with Wyatt long action Mag insert.
Bix N Andy Single stage trigger
Manners EH-8 in Black Forest bedded action. Grove QD Sling inserts - left side. Javelin Bipod Stock Insert.
Hawkins 30 Custom Hybrid Rings with 20 MOA
Whidden Custom Dies

Currently running Amax 130s @ around 2800 - round count > 150...

Weight is 2.7kgs bare rifle - bear in mind the Bartein 2B is a truck axle and its not fluted, although short.

Current replacement component cost $6800, add another $500 plus for chambering and bedding, and thats the cost of a new build with this spec...

If you're interested?

@Sidney very nice, can we have a photo please.

That sounds bad arse @Sidney
How do you find the bix'n andy trigger?

One of the best triggers produced. Let off is more consistent than others and it is the choice of some of the best benchrest shooters on the planet. Not as fussy as say a Jewell in dirty or Dusty conditions.

Very predictable

Originally Posted by Sidney

One of the best triggers produced. Let off is more consistent than others and it is the choice of some of the best benchrest shooters on the planet. Not as fussy as say a Jewell in dirty or Dusty conditions.

Very predictable

Great to hear thanks, I have just ordered one for my tikka!

Have you considered 6.5-06? Something a bit different

Sent from my SM-G970F using Tapatalk

over the years I've had most 6.5 Cal and now I'm back at the sako.260.
The 6.5-06 and the AI version need a 24" barrel to get the most out of them, then I did a 20" 6.5-284 and struggled to get much over 2800fps with 130grn.
Then a Tikka .260 in both 18" and 20" both doing over 2800 fps with 143 grn.
And now I've only gone to a Sako carbon light .260 because it came up. It shoots no better than the Tikka but is nicer to use.
So I would stick with a .260 or a Creedmoor.


Sent from my CPH1903 using Tapatalk

Originally Posted by 25 /08 IMP

over the years I've had most 6.5 Cal and now I'm back at the sako.260.
The 6.5-06 and the AI version need a 24" barrel to get the most out of them, then I did a 20" 6.5-284 and struggled to get much over 2800fps with 130grn.
Then a Tikka .260 in both 18" and 20" both doing over 2800 fps with 143 grn.
And now I've only gone to a Sako carbon light .260 because it came up. It shoots no better than the Tikka but is nicer to use.
So I would stick with a .260 or a Creedmoor.


Sent from my CPH1903 using Tapatalk

Good advice that

Sent from my SM-G960F using Tapatalk

I have a Bartlein 2B barrel on my 6.5 06 and yes it's a little [all 27 inches of it] heavier than the Finn barrel or the 06 barrel or the 9.3 barrel or the ...
However by crikey it's accurate.
Cheers Cam.

Originally Posted by jakewire

I have a Bartlein 2B barrel on my 6.5 06 and yes it's a little [all 27 inches of it] heavier than the Finn barrel or the 06 barrel or the 9.3 barrel or the ...
However by crikey it's accurate.
Cheers Cam.

I got a 2B and the smith spun it down to a T3 contour no problems. Very accurate.

I did something similar to my tikka .223 where I put on a CF stock, lighten this, lighten that but in the end had I have just bought a Kimber .223 I would have had a lighter and cheaper rifle.

Have you looked to see what’s available from manufacturers in your price range... what about a Forbes rifle?

Does it have to be a .260? I have a Kimber 7mm-08 that’s a tack driver the kids use out to 300 mtrs no problems

Originally Posted by Seventenths

I did something similar to my tikka .223 where I put on a CF stock, lighten this, lighten that but in the end had I have just bought a Kimber .223 I would have had a lighter and cheaper rifle.

Have you looked to see what’s available from manufacturers in your price range... what about a Forbes rifle?

Does it have to be a .260? I have a Kimber 7mm-08 that’s a tack driver the kids use out to 300 mtrs no problems

to be fair no I haven't looked as I was not intending to buy just yet, more just researching so when the time comes I can make an informed decision.
reasonably set on a 260 just because it's an itch I want to scratch.....who knows in 6 months time

Originally Posted by dannyb

to be fair no I haven't looked as I was not intending to buy just yet, more just researching so when the time comes I can make an informed decision.
reasonably set on a 260 just because it's an itch I want to scratch.....who knows in 6 months time

Fair enough as i understand that itch so .260 it is