Thread: Various Knives

This is one I did some time back and have just got the full edit on the video done.

This one away to Florida in the morning. A 4x4 Hunter with both the horrozontal sheath (10 degrees down for security) and the standard behind the hip sheath. 4 inch blade of 1084 with curve back buffalo horn and exhibition walnut. black micarta pins in handle with my 3 pin brass mark in the bolster.

This 1 looks like my 1

Originally Posted by Padox

This 1 looks like my 1

I believe if memory serves mme right that yours was a Hunter Skinner and this is a new design that was a collaboration with a customer from AU about 12 months ago. His had cross grained Red Gum over brass

Beautiful work. I like the point angle too.

Originally Posted by FRST

Beautiful work. I like the point angle too.

Have to be able to do the opening cut under the skin without digging in on the point so it is a blaance to get the point and the belly right.

Four more ready to go to Oregon in the US.

A Light HUnter with spalted maple burl over curve backed buffalo horn bolsters on the 1084 blade.





Three A H EDC's with Koa (Hawaii) Maple burl (USA) and Karelian Birch burl (Ukraine) on the cryo treated NitroV SS blades.

A few ready for epoxy and pins

Have these all done now and ready for the heritage day here early november. The shop has another 10 or 12 that I will get back to have a decent display. Just the group pic for today as its been a long one getting all the sheaths sewn, hot waxed and the blades all sharpened so will get some individual pics and details later in the week. Couple of new handle materials in there

First decent pic of the 8 inch carving set I took today and will get the rest tomorrow

As noted an 8 inch cryo treated NitroV SS carving set with Hickory Burl over brass bolsters

A few pics of the completed knives. Just have to go over and do the final cleaning now of any finger prints and shed clart left after sharpening etc
First is a skinner and a Boning knife.
The Skinner has Resin Ivory scales over G10 CB bolsters on the 4 1/4 in 1084 blade and the Boner has Black Palm on the 6 1/4 in 1084 blade


The PH EDC has brown linen micarta over black linen CB bloster on the 4 3/4 in 1075 blade



The 4x4 Hunter has a very nice piece of Arizona desertwood over CB buffalo horn bolsters with black G10 liners on the 4 inch 1084 blade

A fisherman and a Filliting knife

The Fisherman has blue infused acrylic over blue G10 liners on the 5 inch cryo treated NitroV SS blade and the Filliter has the same handle specs on the 6 3/4 in cryo treated NitroV SS blade





The Little Grayling has double dyed Lacewood between the brasse bolster and pommel with chocolate lanyard annd bead on the 4 1/4 in cryo treated NitroV SS blade

Two Pocket Rangers. One has Impala jigged buffalo horn c]scales over red G10 liners on the 5 in SS damascus blade and the other has Cherry Burl over CB buffalo horn bolsters on the 5 in 1095 carbon blade





and a Bird and Trout with rough jigged dyed bone scales on the 4 1/4 in cryo treated NitroV SS blade

I was dissapointed in the scales as theyhad a nice royal blue on each end but thay was only a surface dye and was ground off with the shaping so I will have to except the other 9 scale sets I have will be the same. Not a bad look in itself , just not what I had expected

A little fruit knife for the kitchen with spilled milk acrylic on the 3 in cryo treated NitroV SS blade



This is another of the sheep shear blades with figured Eucalyptus handle and copper pins





And a roughy to finish with this piece of antler on the 5 in 1084 HC blade. Had the knife sitting for a while but was never happy with the bulk of the antler handle so gave it a severe re-shape and it feels much better in hand and it will serve for a hunter now. Will have to do some tidy up on it before the herritage day display.

Two of the new design Heavy hunters all done. Blades are 5 inch of .170/4.3mm with the first one being a new personal knife with a lovely piece of exhibition grade walnut over CB buffalo horn on the 1075 high carbon blade.






Second one has OD canvas micarta over orange liners on a NitroV SS blade